ENGLISH 简体中文 日本語 한국어  

    로그인 | 회원가입 


   
 
키워드나 부품번호를 입력해주세요    



MAX9877AERP
DirectDrive 헤드폰 앰프가 내장된 낮은 RF 민감도, 모노 오디오 서브시스템

업계 최소형, 최고 D 클래스 출력 전력 및 동급 최고의 RF 민감도 (TDMA 잡음 없음)


  QuickView     기술 자료     주문 정보     추가 정보     사용자 의견 (0)     전체  
상태
구매 가능: 생산 중

제품 설명
전체 데이터 시트 (PDF, 492kB)
English Download this datasheet in PDF format다운로드
The MAX9877A combines a high-efficiency Class D audio power amplifier with a stereo Class AB capacitorless DirectDrive® headphone amplifier. Maxim's 3rd generation, filterless Class D amplifier with active emissions limiting* technology provides Class AB performance with Class D efficiency.

The MAX9877A delivers up to 725mW from a 3.7V supply into an 8Ω load with 87% efficiency to extend battery life. The filterless modulation scheme combined with active emissions limiting circuitry and spread-spectrum modulation** greatly reduces EMI while eliminating the need for output filtering used in traditional Class D devices.

The stereo Class AB headphone amplifier in the MAX9877A uses Maxim's patented DirectDrive architecture, that produces a ground-referenced output from a single supply, eliminating the need for large DC-blocking capacitors, saving cost, space, and component height.

The device utilizes a user-defined input architecture, three preamplifier gain settings, an input mixer, volume control, comprehensive click-and-pop suppression, and I²C control. A bypass mode feature disables the integrated Class D amplifier and utilizes an internal DPST switch to allow an external amplifier to drive the speaker that is connected at the outputs of the MAX9877A.

The MAX9877A is available in a thermally efficient, space-saving 20-bump MaxFilm package.

주요기능   애플리케이션/용도
  • Low Emissions, Filterless Class D Amplifier Achieves Better than 10dB Margin Under EN55022 Class B Limits
  • Low RF Susceptibility Design Rejects TDMA Noise from GSM Radios
  • Input Mixer with User-Defined Input Mode
  • 725mW Speaker Output (RSPK = 8Ω, PVDD = 3.7V)
  • 53mW Headphone Output (RHP = 16Ω, VDD = 3.7V)
  • Low 0.05% THD+N at 1kHz (Class D Power Amplifier)
  • Low 0.016% THD+N at 1kHz (Headphone Amplifier)
  • 87% Efficiency (RSPK = 8Ω, POUT = 750mW)
  • 1.6Ω Analog Switch for Speaker Amplifier Bypass
  • High Speaker Amplifier PSRR (72dB at 217Hz)
  • High Headphone Amplifier PSRR (84dB at 217Hz)
  • I²C Control
  • Hardware and Software Shutdown Mode
  • Click-and-Pop Suppression
  • Current-Limit and Thermal Protection
  • Available in a Space-Saving, 2.5mm x 2.0mm MaxFilm Package

 

*미국 특허 #7,190,225.
**미국 특허 #6,847,257.

다이어그램
MAX9877AERP: Simplified Block Diagram
간략한 블록 다이어그램

필요한 것을 찾지 못하셨나요?
  • 익일에 제공되는 애플리케이션 엔지니어의 제품 선택 조언
  • 파라메트릭 검색
  • 애플리케이션 도움말
  •  QuickView   기술 자료   주문 정보   추가 정보  
     제품 설명 
     주요기능 
     애플리케이션/용도 
     주요 사양 
     다이어그램 

     데이터 시트 
     애플리케이션 노트 
     디자인 가이드 
     Engineering Journal 
     신뢰성 보고서 
     소프트웨어/모델 
     EV 킷 

     가격 및 재고 유모 
     샘플 
     온라인 구매 
     패키지 정보 
     Lead-Free 정보 

     관련된 제품군 
     참고 사항 
     EV 킷 

    문서 레퍼런스 19-4651; 개정판 0; 2009-11-05
    이 페이지는 최근에 변경됨: 2009-11-12


            •         •         •     개인정보보호 정책     •     법적 고지

        Copyright © 2009 by Maxim Integrated Products