The MAX8722C integrated backlight controller is optimized to drive cold-cathode fluorescent lamps (CCFLs) using a full-bridge resonant inverter architecture. Resonant operation maximizes striking capability and provides near-sinusoidal waveforms over the entire input range to improve CCFL lifetime. The controller operates over a wide input voltage range (4.6V to 28V) with high power to light efficiency. The device also includes safety features that effectively protect against many single-point fault conditions including lamp-out and short-circuit faults.
The MAX8722C achieves 10:1 dimming range by "chopping" the lamp current on and off using a digital pulse-width modulation (DPWM) method. The DPWM frequency can be accurately adjusted with a resistor or synchronized to an external signal. The brightness is controlled by an analog voltage on the CNTL pin. The device directly drives the four external n-channel power MOSFETs of the full-bridge inverter. An internal 5.3V linear regulator powers the MOSFET drivers, the DPWM oscillator, and most of the internal circuitry. The MAX8722C is available in a low-cost, 24-pin QSOP package and operates over a -40°C to +85°C temperature range.
주요기능
애플리케이션/용도
Synchronized to Resonant Frequency
Longer Lamp Life
Guaranteed Striking Capability
High Power to Light Efficiency
Wide Input Voltage Range (4.6V to 28V)
Input-Voltage Feed-Forward for Excellent Line Rejection
Accurate Dimming Control with Analog Interface
10:1 Dimming Range
Adjustable Accurate DPWM Frequency with Sync Function
Adjustable Lamp Current Rise and Fall Time
Secondary Voltage Limit Reduces Transformer Stress
Lamp-Out Protection with Adjustable Timeout
Secondary Overcurrent Protection with Adjustable Timeout
다운로드