ENGLISH 简体中文 日本語 한국어  

MAX8805, MAX8805W, MAX8805X, MAX8805Y, MAX8805Z
600mA/650mA PWM Step-Down Converters in 2mm x 2mm WLP for WCDMA PA Power

Small (4mm)² Package Provides Power and Bias to 2 WCDMA PA Modules


  QuickView     Technical Documents     Ordering Info     More Information     User Comments (0)     All  
Data Sheet
FULL DATA SHEET (PDF, 596kB)
Download this datasheet in PDF formatDownload   Send this datasheet to any email addressE-Mail


Description
The MAX8805W/MAX8805X/MAX8805Y/MAX8805Z high-frequency step-down converters are optimized for dynamically powering the power amplifier (PA) in WCDMA or NCDMA handsets. The devices integrate a high-efficiency PWM step-down converter for medium- and low-power transmission, and a 60mΩ typical bypass FET to power the PA directly from the battery during high-power transmission. Dual 200mA low-noise, high-PSRR low-dropout regulators (LDOs) for PA biasing are also integrated.

Two switching frequency options are available (2MHz for the MAX8805W/MAX8805Y and 4MHz for the MAX8805X/MAX8805Z), allowing optimization for smallest solution size or highest efficiency. Fast switching allows the use of small ceramic 2.2µF input and output capacitors while maintaining low ripple voltage. The feedback network is integrated, further reducing external component count and total solution size.

The MAX8805W/MAX8805X/MAX8805Y/MAX8805Z use an analog input driven by an external DAC to control the output voltage linearly for continuous PA power adjustment. The REFIN to OUT gain is available in two options (2V/V for the MAX8805Y/MAX8805Z and 2.5V/V for the MAX8805W/MAX8805X). At high-duty cycle, the MAX8805W/MAX8805X/MAX8805Y/MAX8805Z automatically switch to the bypass mode, connecting the input to the output through a low-impedance (60mΩ typ) MOSFET. The user can also enable the bypass mode directly through a logic-control input.

The LDOs in the MAX8805W/MAX8805X/MAX8805Y/MAX8805Z are designed for low-noise operation (35µVRMS typ). Each LDO is individually enabled through its own logic control interface.

The MAX8805W/MAX8805X/MAX8805Y/MAX8805Z are available in a 16-bump, 2mm x 2mm WLP package (0.7mm max height).

Key Features   Applications/Uses
  • PA Step-Down Converter
    • 7.5µs (typ) Settling Time for 0.8V to 3.4V Output Voltage Change
    • Dynamic Output Voltage Setting from 0.4V to VBATT
    • 60mΩ pFET and 100% Duty Cycle for Low Dropout
    • 2MHz or 4MHz Switching Frequency
    • Low Output-Voltage Ripple
    • 600mA (MAX8805Y/MAX8805Z) or 650mA (MAX8805W/MAX8805X) Output Drive Capability
    • 2% Gain Accuracy
    • Tiny External Components
  • Dual Low-Noise LDOs
    • Low 35µVRMS (typ) Output Noise
    • High 70dB (typ) PSRR
    • Guaranteed 200mA Output Drive Capability
    • Individual ON/OFF Control
  • Low 0.1µA Shutdown Current
  • 2.7V to 5.5V Supply Voltage Range
  • Thermal Shutdown
  • Tiny 2mm x 2mm x 0.7mm WLP Package (4 x 4 Grid)

 
  • Smartphones
  • WCDMA/NCDMA Cellular Handsets
  • Wireless PDAs

    Key Specifications:   Step-Down Switching Regulators
    Part Number VIN (min) (V) VIN (max) (V) Min. VOUT (V) Max. VOUT (V) IOUT (A) IOUT (A) Output Adj. Method Operating Current, ICC (max) (mA) Number of DC-DC Outputs Operating Freq. (kHz) Package Price**
    MAX8805  2.7 5.5 0.4 5.5 0.65 0.65 Dyn. REF In
    Resistor
    3.5 1 4000 WLP/0 $1.77 @ 1k
    See All Step-Down Switching Regulators (222)
    Notes:
    **This pricing is BUDGETARY, for comparing similar parts. Prices are in U.S. dollars and subject to change. Quantity pricing may vary substantially and international prices may differ due to local duties, taxes, fees, and exchange rates. For volume-specific prices and delivery, please see the price and availability page or contact an authorized distributor.

    Diagram
    MAX8805Y, MAX8805Z
    MAX8805Y, MAX8805Z

    Evaluation Kits
  • MAX8805WEVKIT

    Design Guides
  • COMMUNICATIONS (PDF)
  • POWER MANAGEMENT FOR BATTERY-POWERED EQUIPMENT (PDF)

    Reliability Reports
  • Show FIT data for:
  • Request Reliability Report for:

    Software/Models
    none

    Ordering Information
    Notes:

    1. Other options and links for purchasing parts are listed at: http://www.maxim-ic.com/sales.
    2. Didn't Find What You Need? Ask our applications engineers. Expert assistance in finding parts, usually within one business day.
    3. Part number suffixes: T or T&R = tape and reel; + = RoHS/lead-free; # = RoHS/lead-exempt. More: SeeFull Data Sheet or Part Naming Conventions.
    4. * Some packages have variations, listed on the drawing. "PkgCode/Variation" tells which variation the product uses. Note that "+", "#", "-" in the part number suffix describes RoHS status. Package drawings may show a different suffix character.


    Filter:

    Devices: 1-100 of 105

    1 2  --->

    MAX8805W Free
    Sample
    Buy
    Package: TYPE PINS FOOTPRINT
      DRAWING CODE/VAR *
    Temp RoHS/Lead-Free?
    Materials Analysis
    MAX8805WEWEEE+TC8E  



    -40°C to +85°C See data sheet
    MAX8805WEWEGG+T  
    WLP;16 pin;
    Dwg: 21-0200 (PDF)
    Use pkgcode/variation: W162B2+1*
    -40°C to +85°C See data sheet
    Materials Analysis
    MAX8805WEWEEE+T  
    WLP;16 pin;
    Dwg: 21-0200 (PDF)
    Use pkgcode/variation: W162B2+1*
    -40°C to +85°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    MAX8805WEWEDD+T  
    WLP;16 pin;
    Dwg: 21-0200 (PDF)
    Use pkgcode/variation: W162B2+1*
    -40°C to +85°C See data sheet
    Materials Analysis
    MAX8805WEWECE+T  
    WLP;16 pin;
    Dwg: 21-0200 (PDF)
    Use pkgcode/variation: W162B2+1*
    -40°C to +85°C See data sheet
    Materials Analysis
    MAX8805WEWECD+T  
    WLP;16 pin;
    Dwg: 21-0200 (PDF)
    Use pkgcode/variation: W162B2+1*
    -40°C to +85°C See data sheet
    Materials Analysis
    MAX8805WEWECC+T  
    WLP;16 pin;
    Dwg: 21-0200 (PDF)
    Use pkgcode/variation: W162B2+1*
    -40°C to +85°C See data sheet
    Materials Analysis
    MAX8805WEWEBE+T  
    WLP;16 pin;
    Dwg: 21-0200 (PDF)
    Use pkgcode/variation: W162B2+1*
    -40°C to +85°C See data sheet
    Materials Analysis
    MAX8805WEWEBD+T  
    WLP;16 pin;
    Dwg: 21-0200 (PDF)
    Use pkgcode/variation: W162B2+1*
    -40°C to +85°C See data sheet
    Materials Analysis
    MAX8805WEWEBC+T  
    WLP;16 pin;
    Dwg: 21-0200 (PDF)
    Use pkgcode/variation: W162B2+1*
    -40°C to +85°C See data sheet
    Materials Analysis
    MAX8805WEWEAE+T  
    WLP;16 pin;
    Dwg: 21-0200 (PDF)
    Use pkgcode/variation: W162B2+1*
    -40°C to +85°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    MAX8805WEWEAA+  
    WLP;16 pin;
    Dwg: 21-0200 (PDF)
    Use pkgcode/variation: W162B2+1*
    -40°C to +85°C See data sheet
    Materials Analysis
    MAX8805WEWEBE+  
    WLP;16 pin;
    Dwg: 21-0200 (PDF)
    Use pkgcode/variation: W162B2+1*
    -40°C to +85°C See data sheet
    Materials Analysis
    MAX8805WEWEAC+  
    WLP;16 pin;
    Dwg: 21-0200 (PDF)
    Use pkgcode/variation: W162B2+1*
    -40°C to +85°C See data sheet
    Materials Analysis
    MAX8805WEWEGG+  
    WLP;16 pin;
    Dwg: 21-0200 (PDF)
    Use pkgcode/variation: W162B2+1*
    -40°C to +85°C See data sheet
    Materials Analysis
    MAX8805WEWEEE+  
    WLP;16 pin;
    Dwg: 21-0200 (PDF)
    Use pkgcode/variation: W162B2+1*
    -40°C to +85°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    MAX8805WEWEDD+  
    WLP;16 pin;
    Dwg: 21-0200 (PDF)
    Use pkgcode/variation: W162B2+1*
    -40°C to +85°C See data sheet
    Materials Analysis
    MAX8805WEWECE+  
    WLP;16 pin;
    Dwg: 21-0200 (PDF)
    Use pkgcode/variation: W162B2+1*
    -40°C to +85°C See data sheet
    Materials Analysis
    MAX8805WEWECD+  
    WLP;16 pin;
    Dwg: 21-0200 (PDF)
    Use pkgcode/variation: W162B2+1*
    -40°C to +85°C See data sheet
    Materials Analysis
    MAX8805WEWECC+  
    WLP;16 pin;
    Dwg: 21-0200 (PDF)
    Use pkgcode/variation: W162B2+1*
    -40°C to +85°C See data sheet
    Materials Analysis
    MAX8805WEWEBD+  
    WLP;16 pin;
    Dwg: 21-0200 (PDF)
    Use pkgcode/variation: W162B2+1*
    -40°C to +85°C See data sheet
    Materials Analysis
    MAX8805WEWEBC+  
    WLP;16 pin;
    Dwg: 21-0200 (PDF)
    Use pkgcode/variation: W162B2+1*
    -40°C to +85°C See data sheet
    Materials Analysis
    MAX8805WEWEAE+  
    WLP;16 pin;
    Dwg: 21-0200 (PDF)
    Use pkgcode/variation: W162B2+1*
    -40°C to +85°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    MAX8805WEWEAD+  
    WLP;16 pin;
    Dwg: 21-0200 (PDF)
    Use pkgcode/variation: W162B2+1*
    -40°C to +85°C See data sheet
    Materials Analysis
    MAX8805WEWEAD+T  
    WLP;16 pin;
    Dwg: 21-0200 (PDF)
    Use pkgcode/variation: W162B2+1*
    -40°C to +85°C See data sheet
    Materials Analysis
    MAX8805WEWEAA+T  
    WLP;16 pin;
    Dwg: 21-0200 (PDF)
    Use pkgcode/variation: W162B2+1*
    -40°C to +85°C See data sheet
    Materials Analysis
    MAX8805WEWEAC+T  
    WLP;16 pin;
    Dwg: 21-0200 (PDF)
    Use pkgcode/variation: W162B2+1*
    -40°C to +85°C See data sheet
    Materials Analysis
    MAX8805X Free
    Sample
    Buy
    Package: TYPE PINS FOOTPRINT
      DRAWING CODE/VAR *
    Temp RoHS/Lead-Free?
    Materials Analysis
    MAX8805XEWEAA+  
    WLP;16 pin;
    Dwg: 21-0200 (PDF)
    Use pkgcode/variation: W162B2+1*
    -40°C to +85°C See data sheet
    Materials Analysis
    MAX8805XEWEBC+T  
    WLP;16 pin;
    Dwg: 21-0200 (PDF)
    Use pkgcode/variation: W162B2+1*
    -40°C to +85°C See data sheet
    Materials Analysis
    MAX8805XEWEBD+T  
    WLP;16 pin;
    Dwg: 21-0200 (PDF)
    Use pkgcode/variation: W162B2+1*
    -40°C to +85°C See data sheet
    Materials Analysis
    MAX8805XEWEBE+T  
    WLP;16 pin;
    Dwg: 21-0200 (PDF)
    Use pkgcode/variation: W162B2+1*
    -40°C to +85°C See data sheet
    Materials Analysis
    MAX8805XEWECC+T  
    WLP;16 pin;
    Dwg: 21-0200 (PDF)
    Use pkgcode/variation: W162B2+1*
    -40°C to +85°C See data sheet
    Materials Analysis
    MAX8805XEWECD+T  
    WLP;16 pin;
    Dwg: 21-0200 (PDF)
    Use pkgcode/variation: W162B2+1*
    -40°C to +85°C See data sheet
    Materials Analysis
    MAX8805XEWECE+T  
    WLP;16 pin;
    Dwg: 21-0200 (PDF)
    Use pkgcode/variation: W162B2+1*
    -40°C to +85°C See data sheet
    Materials Analysis
    MAX8805XEWEDD+T  
    WLP;16 pin;
    Dwg: 21-0200 (PDF)
    Use pkgcode/variation: W162B2+1*
    -40°C to +85°C See data sheet
    Materials Analysis
    MAX8805XEWEEE+T  
    WLP;16 pin;
    Dwg: 21-0200 (PDF)
    Use pkgcode/variation: W162B2+1*
    -40°C to +85°C See data sheet
    Materials Analysis
    MAX8805XEWEAE+  
    WLP;16 pin;
    Dwg: 21-0200 (PDF)
    Use pkgcode/variation: W162B2+1*
    -40°C to +85°C See data sheet
    Materials Analysis
    MAX8805XEWEAD+  
    WLP;16 pin;
    Dwg: 21-0200 (PDF)
    Use pkgcode/variation: W162B2+1*
    -40°C to +85°C See data sheet
    Materials Analysis
    MAX8805XEWEGG+T  
    WLP;16 pin;
    Dwg: 21-0200 (PDF)
    Use pkgcode/variation: W162B2+1*
    -40°C to +85°C See data sheet
    Materials Analysis
    MAX8805XEWEAC+  
    WLP;16 pin;
    Dwg: 21-0200 (PDF)
    Use pkgcode/variation: W162B2+1*
    -40°C to +85°C See data sheet
    Materials Analysis
    MAX8805XEWEAE+T  
    WLP;16 pin;
    Dwg: 21-0200 (PDF)
    Use pkgcode/variation: W162B2+1*
    -40°C to +85°C See data sheet
    Materials Analysis
    MAX8805XEWEAD+T  
    WLP;16 pin;
    Dwg: 21-0200 (PDF)
    Use pkgcode/variation: W162B2+1*
    -40°C to +85°C See data sheet
    Materials Analysis
    MAX8805XEWECC+  
    WLP;16 pin;
    Dwg: 21-0200 (PDF)
    Use pkgcode/variation: W162B2+1*
    -40°C to +85°C See data sheet
    Materials Analysis
    MAX8805XEWEBD+  
    WLP;16 pin;
    Dwg: 21-0200 (PDF)
    Use pkgcode/variation: W162B2+1*
    -40°C to +85°C See data sheet
    Materials Analysis
    MAX8805XEWECD+  
    WLP;16 pin;
    Dwg: 21-0200 (PDF)
    Use pkgcode/variation: W162B2+1*
    -40°C to +85°C See data sheet
    Materials Analysis
    MAX8805XEWECE+  
    WLP;16 pin;
    Dwg: 21-0200 (PDF)
    Use pkgcode/variation: W162B2+1*
    -40°C to +85°C See data sheet
    Materials Analysis
    MAX8805XEWEDD+  
    WLP;16 pin;
    Dwg: 21-0200 (PDF)
    Use pkgcode/variation: W162B2+1*
    -40°C to +85°C See data sheet
    Materials Analysis
    MAX8805XEWEEE+  
    WLP;16 pin;
    Dwg: 21-0200 (PDF)
    Use pkgcode/variation: W162B2+1*
    -40°C to +85°C See data sheet
    Materials Analysis
    MAX8805XEWEGG+  
    WLP;16 pin;
    Dwg: 21-0200 (PDF)
    Use pkgcode/variation: W162B2+1*
    -40°C to +85°C See data sheet
    Materials Analysis
    MAX8805XEWEAC+T  
    WLP;16 pin;
    Dwg: 21-0200 (PDF)
    Use pkgcode/variation: W162B2+1*
    -40°C to +85°C See data sheet
    Materials Analysis
    MAX8805XEWEAA+T  
    WLP;16 pin;
    Dwg: 21-0200 (PDF)
    Use pkgcode/variation: W162B2+1*
    -40°C to +85°C See data sheet
    Materials Analysis
    MAX8805XEWEBC+  
    WLP;16 pin;
    Dwg: 21-0200 (PDF)
    Use pkgcode/variation: W162B2+1*
    -40°C to +85°C See data sheet
    Materials Analysis
    MAX8805XEWEBE+  
    WLP;16 pin;
    Dwg: 21-0200 (PDF)
    Use pkgcode/variation: W162B2+1*
    -40°C to +85°C See data sheet
    Materials Analysis
    MAX8805Y Free
    Sample
    Buy
    Package: TYPE PINS FOOTPRINT
      DRAWING CODE/VAR *
    Temp RoHS/Lead-Free?
    Materials Analysis
    MAX8805YEWEAA+  
    WLP;16 pin;
    Dwg: 21-0200 (PDF)
    Use pkgcode/variation: W162B2+1*
    -40°C to +85°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    MAX8805YEWEEE+  
    WLP;16 pin;
    Dwg: 21-0200 (PDF)
    Use pkgcode/variation: W162B2+1*
    -40°C to +85°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    MAX8805YEWECE+  
    WLP;16 pin;
    Dwg: 21-0200 (PDF)
    Use pkgcode/variation: W162B2+1*
    -40°C to +85°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    MAX8805YEWECD+  
    WLP;16 pin;
    Dwg: 21-0200 (PDF)
    Use pkgcode/variation: W162B2+1*
    -40°C to +85°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    MAX8805YEWEGG+  
    WLP;16 pin;
    Dwg: 21-0200 (PDF)
    Use pkgcode/variation: W162B2+1*
    -40°C to +85°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    MAX8805YEWECC+  
    WLP;16 pin;
    Dwg: 21-0200 (PDF)
    Use pkgcode/variation: W162B2+1*
    -40°C to +85°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    MAX8805YEWEBE+  
    WLP;16 pin;
    Dwg: 21-0200 (PDF)
    Use pkgcode/variation: W162B2+1*
    -40°C to +85°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    MAX8805YEWEBD+  
    WLP;16 pin;
    Dwg: 21-0200 (PDF)
    Use pkgcode/variation: W162B2+1*
    -40°C to +85°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    MAX8805YEWEBC+  
    WLP;16 pin;
    Dwg: 21-0200 (PDF)
    Use pkgcode/variation: W162B2+1*
    -40°C to +85°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    MAX8805YEWEAE+  
    WLP;16 pin;
    Dwg: 21-0200 (PDF)
    Use pkgcode/variation: W162B2+1*
    -40°C to +85°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    MAX8805YEWEBG+  
    WLP;16 pin;
    Dwg: 21-0200 (PDF)
    Use pkgcode/variation: W162B2+1*
    -40°C to +85°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    MAX8805YEWEAC+  
    WLP;16 pin;
    Dwg: 21-0200 (PDF)
    Use pkgcode/variation: W162B2+1*
    -40°C to +85°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    MAX8805YEWEAD+  
    WLP;16 pin;
    Dwg: 21-0200 (PDF)
    Use pkgcode/variation: W162B2+1*
    -40°C to +85°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    MAX8805YEWEDD+  
    WLP;16 pin;
    Dwg: 21-0200 (PDF)
    Use pkgcode/variation: W162B2+1*
    -40°C to +85°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    MAX8805YEWEAA+T  
    WLP;16 pin;
    Dwg: 21-0200 (PDF)
    Use pkgcode/variation: W162B2+1*
    -40°C to +85°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    MAX8805YEWEEE+T  
    WLP;16 pin;
    Dwg: 21-0200 (PDF)
    Use pkgcode/variation: W162B2+1*
    -40°C to +85°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    MAX8805YEWEDD+T  
    WLP;16 pin;
    Dwg: 21-0200 (PDF)
    Use pkgcode/variation: W162B2+1*
    -40°C to +85°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    MAX8805YEWECE+T  
    WLP;16 pin;
    Dwg: 21-0200 (PDF)
    Use pkgcode/variation: W162B2+1*
    -40°C to +85°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    MAX8805YEWECD+T  
    WLP;16 pin;
    Dwg: 21-0200 (PDF)
    Use pkgcode/variation: W162B2+1*
    -40°C to +85°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    MAX8805YEWECC+T  
    WLP;16 pin;
    Dwg: 21-0200 (PDF)
    Use pkgcode/variation: W162B2+1*
    -40°C to +85°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    MAX8805YEWEBE+T  
    WLP;16 pin;
    Dwg: 21-0200 (PDF)
    Use pkgcode/variation: W162B2+1*
    -40°C to +85°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    MAX8805YEWEBD+T  
    WLP;16 pin;
    Dwg: 21-0200 (PDF)
    Use pkgcode/variation: W162B2+1*
    -40°C to +85°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    MAX8805YEWEBC+T  
    WLP;16 pin;
    Dwg: 21-0200 (PDF)
    Use pkgcode/variation: W162B2+1*
    -40°C to +85°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    MAX8805YEWEAE+T  
    WLP;16 pin;
    Dwg: 21-0200 (PDF)
    Use pkgcode/variation: W162B2+1*
    -40°C to +85°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    MAX8805YEWEAD+T  
    WLP;16 pin;
    Dwg: 21-0200 (PDF)
    Use pkgcode/variation: W162B2+1*
    -40°C to +85°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    MAX8805YEWEGG+T  
    WLP;16 pin;
    Dwg: 21-0200 (PDF)
    Use pkgcode/variation: W162B2+1*
    -40°C to +85°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    MAX8805YEWEAC+T  
    WLP;16 pin;
    Dwg: 21-0200 (PDF)
    Use pkgcode/variation: W162B2+1*
    -40°C to +85°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    MAX8805YEWEBG+T  
    WLP;16 pin;
    Dwg: 21-0200 (PDF)
    Use pkgcode/variation: W162B2+1*
    -40°C to +85°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    MAX8805Z Free
    Sample
    Buy
    Package: TYPE PINS FOOTPRINT
      DRAWING CODE/VAR *
    Temp RoHS/Lead-Free?
    Materials Analysis
    MAX8805ZEWEEE+  
    WLP;16 pin;
    Dwg: 21-0200 (PDF)
    Use pkgcode/variation: W162B2+1*
    -40°C to +85°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    MAX8805ZEWEAC+  
    WLP;16 pin;
    Dwg: 21-0200 (PDF)
    Use pkgcode/variation: W162B2+1*
    -40°C to +85°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    MAX8805ZEWEAD+  
    WLP;16 pin;
    Dwg: 21-0200 (PDF)
    Use pkgcode/variation: W162B2+1*
    -40°C to +85°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    MAX8805ZEWEAE+  
    WLP;16 pin;
    Dwg: 21-0200 (PDF)
    Use pkgcode/variation: W162B2+1*
    -40°C to +85°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    MAX8805ZEWEBC+  
    WLP;16 pin;
    Dwg: 21-0200 (PDF)
    Use pkgcode/variation: W162B2+1*
    -40°C to +85°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    MAX8805ZEWEBE+  
    WLP;16 pin;
    Dwg: 21-0200 (PDF)
    Use pkgcode/variation: W162B2+1*
    -40°C to +85°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    MAX8805ZEWEGG+  
    WLP;16 pin;
    Dwg: 21-0200 (PDF)
    Use pkgcode/variation: W162B2+1*
    -40°C to +85°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    MAX8805ZEWECD+  
    WLP;16 pin;
    Dwg: 21-0200 (PDF)
    Use pkgcode/variation: W162B2+1*
    -40°C to +85°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    MAX8805ZEWECE+