The MAX8653 dual-output, synchronous, step-down regulator contains low RDS(ON) integrated high-side MOSFET switches for ease of layout and achieving small footprints. Each output delivers up to 5A. The output voltage is adjustable down to 0.6V and operates from a 9V to 14V input voltage. The MAX8653 uses a proprietary high-bandwidth, constant-frequency, peak-voltage-mode control architecture and operates at an adjustable switching frequency between 300kHz to 1.5MHz. The architecture is suitable for use with a wide range of output capacitor technologies such as aluminum electrolytic, POSCAPs, and ceramic capacitors for flexible design. The simple compensation scheme achieves fast response under both line and load transients.
The switching frequency is adjustable using a single external resistor. The output channels operate 180° out-of-phase to reduce the input ripple current, thus reducing the required input capacitance. The high operating frequency minimizes the size of external components. The external reference input (REFIN) enables implementation of tracking applications such as DDR power supplies. The MAX8653 utilizes internal digital soft-start and features a lossless (cyle-by-cyle) current sensing. It includes adjustable, hiccup-mode current-limit and short-circuit protection for minimum power dissipation under fault conditions. Each output contains an enable (EN_) input along with a power-good (POK_) signal for easy sequencing. The MAX8653 is available in a 28-pin, 5mm x 5mm thin QFN package.
필요한 것을 찾지 못하셨나요?
Maxim 애플리케이션 엔지니어에게 문의하십시오. 부품을 찾는데 필요한 전문가의 도움이 보통 업무일 1일 이내에 제공됩니다.
부품번호 suffix: T 또는 T&R = 테잎 앤 릴,
+ = RoHS/lead-free,
# = RoHS/lead 예외.추가 정보: 전체 데이터 시트 또는 부품번호 규칙
*일부 패키지는 크기 편차(variation)를 가지며 이 값은 도면 상에 제시되어 있습니다. “패키지 코드/편차”는 해당 제품이 사용하고 있는 편차를 보여줍니다. 부품번호 suffix에 "+", "#", "-"는 RoHS 준수 상태를 나타냅니다. 패키지 도면에 suffix 문자는 다를 수 있습니다.
다운로드