| Key Features |
|
Applications/Uses |
- 16 E1, T1, or J1 Short/Long-Haul Line Interface Units
- Independent E1, T1 or J1 Selections
- Fully Internal Impedance Match Requires No External Resistors
- Software-Selectable Transmit and Receive-Side Impedance Match
- Crystal-Less Jitter Attenuator
- Selectable Single-Rail and Dual-Rail Mode and AMI or HDB3/B8ZS Line Encoding and Decoding
- Detection and Generation of AIS
- Digital/Analog Loss of Signal Detection as per T1.231, G.775 and ETS 300 233
- External Master Clock Can Be Multiple of 2.048MHz or 1.544MHz for T1/J1 or E1 Operation; This Clock Will Be Internally Adapted for T1 or E1 Usage
- Receiver Signal Level Indicator from -2.5dB to -38dB in T1 Mode and -3dB to -43dB in E1 Mode in 2.5dB Increments
- Two Built-In BERT Testers for Diagnostics
- 8-Bit Parallel Interface Support for Intel or Motorola Mode or a 4-Wire Serial Interface
- Transmit Short-Circuit Protection
- G.772 Nonintrusive Monitoring
- Receive Monitor Mode Handles Combinations of 14dB to 30dB of Resistive Attenuation Along with 12dB to 30dB of Cable Attenuation
- Specification Compliance to the Latest T1 and E1 Standards—ANSI T1.102, AT&T Pub 62411, T1.231, T1.403, ITU-T G.703, G.742, G.775, G.823, ETS 300 166, and ETS 300 233
- Single 3.3V Supply with 5V Tolerant I/O
- JTAG Boundary Scan as Per IEEE 1149.1
|
|
|
|
| Ordering Information |
|
Notes:
- Other options and links for purchasing parts are listed at: http://www.maxim-ic.com/sales.
- Didn't Find What You Need? Ask our applications engineers. Expert assistance in finding parts, usually within one business day.
- Part number suffixes: T or T&R = tape and reel; + = RoHS/lead-free; # = RoHS/lead-exempt. More: SeeFull Data Sheet or Part Naming Conventions.
- * Some packages have variations, listed on the drawing. "PkgCode/Variation" tells which variation the product uses. Note that "+", "#", "-" in the part number suffix describes RoHS status. Package drawings may show a different suffix character.
|
Devices:
1-8
of
8
|
| DS26334 |
Free
Sample |
Buy |
|
Package:
|
TYPE PINS FOOTPRINT
|
| |
DRAWING CODE/VAR *
|
|
Temp |
RoHS/Lead-Free?
Materials Analysis |
DS26334G+
|
|
|
CSBGA;256 pin;
Dwg: 21-0353 (PDF)
Use pkgcode/variation: X256T+1*
|
0°C to +70°C
|
RoHS/Lead-Free: Lead Free
Materials Analysis
|
DS26334GNA2+
|
|
|
CSBGA;256 pin;
Dwg: 21-0353 (PDF)
Use pkgcode/variation: X256T+1*
|
-40°C to +85°C
|
RoHS/Lead-Free: Lead Free
Materials Analysis
|
DS26334GN+
|
|
|
CSBGA;256 pin;
Dwg: 21-0353 (PDF)
Use pkgcode/variation: X256T+1*
|
-40°C to +85°C
|
RoHS/Lead-Free: Lead Free
Materials Analysis
|
DS26334GNA2
|
|
|
CSBGA;256 pin;
Dwg: 21-0353 (PDF)
Use pkgcode/variation: X256T-1*
|
-40°C to +85°C
|
RoHS/Lead-Free: No
Materials Analysis
|
DS26334GNA3
|
|
|
CSBGA;256 pin;
Dwg: 21-0353 (PDF)
Use pkgcode/variation: X256T-1*
|
-40°C to +85°C
|
See data sheet
Materials Analysis
|
DS26334GNA3+
|
|
|
CSBGA;256 pin;
Dwg: 21-0353 (PDF)
Use pkgcode/variation: X256T+1*
|
-40°C to +85°C
|
See data sheet
Materials Analysis
|
DS26334G
|
|
|
CSBGA;256 pin;
Dwg: 21-0353 (PDF)
Use pkgcode/variation: X256T-1*
|
0°C to +70°C
|
RoHS/Lead-Free: No
Materials Analysis
|
DS26334GN
|
|
|
CSBGA;256 pin;
Dwg: 21-0353 (PDF)
Use pkgcode/variation: X256T-1*
|
-40°C to +85°C
|
RoHS/Lead-Free: No
Materials Analysis
|
Download
E-Mail
