The DS2413 is a dual-channel programmable I/O 1-Wire® chip. The PIO outputs are configured as open-drain and provide up to 20mA continuous sink capability and off-state operating voltage up to 28V. Control and sensing of the PIO pins is performed with a dedicated device-level command protocol. To provide a high level of fault tolerance in the end application, the 1-Wire I/O and PIO pins are all capable of withstanding continuous application of voltages up to 28V max. Communication and operation of the DS2413 is performed with the single contact Maxim 1-Wire serial interface.
주요기능
애플리케이션/용도
Open-Drain Programmable I/O Pins
PIO Pins Support 20mA max Continuous Current Sink
Supports 28V (max) PIO Pin Operating Voltage
On-Resistance of PIO Pulldown Transistor 20Ω max; OFF Resistance 1MΩ min
Parasitic Power Supply Through 1-Wire
Communicates to Host with a Single Digital Signal at 14.9kbps or 100kbps Using 1-Wire Protocol
Unique 64-bit ROM Serial Number Factory Lasered Into Each Device
Switchpoint Hysteresis and Filtering to Optimize Performance in the Presence of Noise
1-Wire I/O Pin Supports 28V Absolute Maximum DC Level for Fault Conditions
Operates Over a Wide 1-Wire Voltage Range of 2.8V to 5.25V from 0°C to +70°C
High ESD Immunity of 1-Wire I/O Pin: 8kV HBM Typical
Notes: **This pricing is BUDGETARY, for comparing similar parts. Prices are in
U.S. dollars and subject to change. Quantity pricing may vary
substantially and international prices may differ due to local
duties, taxes, fees, and exchange rates. For volume-specific prices
and delivery, please see the price and availability page
or contact an authorized distributor.
다운로드