The MAX2039 evaluation kit (EV kit) simplifies the evaluation of the MAX2039 UMTS, DCS, and PCS base-station up/downconversion mixer. It is fully assembled and tested at the factory. Standard 50 SMA connectors are included on the EV kit's input and output ports to allow quick and easy evaluation on the test bench.
This document provides a list of test equipment required to evaluate the device, a straightforward test procedure to verify functionality, a description of the EV kit circuit, the circuit schematic, a bill of materials (BOM) for the kit, and artwork for each layer of the PC board.
Key Features
Applications/Uses
Fully Assembled and Tested
50 SMA Connectors on Input and Output Ports
1700MHz to 2200MHz RF Frequency Range
1500MHz to 2000MHz LO Frequency Range
1900MHz to 2400MHz LO Frequency Range (Contact Factory)
DC to 350MHz IF Frequency Range
7.1dB Conversion Loss
+34.5dBm Input IP3 (Downconversion)
+24.4dBm Input 1dB Compression Point
7.3dB Noise Figure
Integrated LO Buffer
Integrated RF and LO Baluns
Low -3dBm to +3dBm LO Drive
Built-In SPDT LO Switch with 45dB LO1 to LO2 Isolation and 50ns Switching Time
External Current-Setting Resistor Provides Option for Operating Mixer in Reduced-Power/Reduced-Performance Mode
* Some packages have variations, listed on the drawing. "PkgCode/Variation" tells which variation the product uses. Note that "+", "#", "-" in the part number suffix describes RoHS status. Package drawings may show a different suffix character.
Devices:
1-1
of
1
MAX2039EVKIT
Free Sample
Buy
Package:
TYPE PINS FOOTPRINT
DRAWING CODE/VAR *
Temp
RoHS/Lead-Free? Materials Analysis
MAX2039EVKIT
See data sheet
Related Products
MAX2039 High-Linearity, 1700MHz to 2200MHz Upconversion/Downconversion Mixer with LO Buffer/Switch
Download
E-Mail
SMA connectors are included on the EV kit's input and output ports to allow quick and easy evaluation on the test bench.
