ENGLISH 简体中文 日本語 한국어  

DS1390, DS1391, DS1392, DS1393, DS1394
Low-Voltage SPI/3-Wire RTCs with Trickle Charger

Low-Voltage SPI/3-Wire RTCs with Trickle Charger have the Broadest Feature Set and the Smallest Footprint in Their Class


  QuickView     Technical Documents     Ordering Info     More Information     User Comments (0)     All  
Data Sheet
FULL DATA SHEET (PDF, 388kB)
Download this datasheet in PDF formatDownload   Send this datasheet to any email addressE-Mail


Description
The low-voltage serial-peripheral interface (SPI™) DS1390/DS1391/DS1394 and the low-voltage 3-wire DS1392/DS1393 real-time clocks (RTCs) are clocks/calendars that provide hundredths of a second, seconds, minutes, hours, day, date, month, and year information. The date at the end of the month is automatically adjusted for months with fewer than 31 days, including corrections for leap year. The clock operates in either the 24-hour or 12-hour format with an AM/PM indicator. One programmable time-of-day alarm is provided. A temperature-compensated voltage reference monitors the status of VCC and automatically disables the bus interface and switches to the backup supply if a power failure is detected. On the DS1390, a single open drain output provides a CPU interrupt or a square wave at one of four selectable frequencies. The DS1391 replaces the SQW/active-low INT pin with an active-low RST output/debounced input.

The DS1390, DS1391, and DS1394 are programmed serially through an SPI-compatible, bidirectional bus. The DS1392 and DS1393 communicate over a 3-wire serial bus, and the extra pin is used for either a separate interrupt pin or an active-low RST output/debounced input.

All five devices are available in a 10-pin µSOP package, and are rated over the industrial temperature range.

Key Features   Applications/Uses
  • Real-Time Clock Counts Hundredths of Seconds, Seconds, Minutes, Hours, Day, Date, Month, and Year with Leap-Year Compensation Valid Up to 2100
  • Output Pin Configurable as Interrupt or Square Wave with Programmable Frequency of 32.768kHz, 8.192kHz, 4.096kHz, or 1Hz (DS1390/DS1393/DS1394 Only)
  • One Time-of-Day Alarm
  • Power-Fail Detect and Switch Circuitry
  • Reset Output/Debounced Input (DS1391/DS1393)
  • Separate SQW and INT Output (DS1392)
  • Trickle-Charge Capability
  • SPI Supports Modes 0 and 2 (DS1394)
  • SPI Supports Modes 1 and 3 (DS1390/DS1391)
  • 3-Wire Interface (DS1392/DS1393)
  • 4MHz at 3.0V and 3.3V
  • 1MHz at 1.8V
  • Three Operating Voltages: 1.8V ±5%, 3.0V ±10%, and 2.97 to 5.5V (DS1394: 3.3V ±10%)
  • Industrial Temperature Range: -40°C to +85°C
  • Underwriters Laboratories (UL®) Recognized

 
  • Embedded Time Stamping
  • GPS/Telematics Devices
  • Handheld Devices
  • Medical Devices

    Key Specifications:   Timekeeping & Real-Time Clocks
    Part Number Time Format (hh = sec/100) Date Format Interface Supply Voltage (V) Time- keeping Current (typ) (nA) CL, Load Capacitance (pF) Memory Type Number of Time of Day Alarms Price**
    DS1390  HH:MM:SS:hh YY-MM-DD SPI 1.8
    3
    3.3
    5
    500 6 None 1 $1.25 @ 1k
    DS1391  SPI $1.25 @ 1k
    DS1392  3-Wire $1.25 @ 1k
    DS1393  3-Wire $1.25 @ 1k
    See All Timekeeping & Real-Time Clocks (86)
    Notes:
    **This pricing is BUDGETARY, for comparing similar parts. Prices are in U.S. dollars and subject to change. Quantity pricing may vary substantially and international prices may differ due to local duties, taxes, fees, and exchange rates. For volume-specific prices and delivery, please see the price and availability page or contact an authorized distributor.

    Application Notes
  • Application Note 58: Crystal Considerations with Dallas Real-Time Clocks (RTCs) - DS1390, DS1391, DS1392, DS1393
  • Application Note 502: Interfacing SPI Real-Time Clocks (RTCs) with a Microcontroller - DS1390, DS1391
  • Application Note 504: Design Considerations for Dallas Semiconductor Real-Time Clocks - DS1393, DS1390, DS1391, DS1392
  • Application Note 505: Lithium Coin-Cell Batteries: Predicting an Application Lifetime - DS1393, DS1390, DS1391, DS1392
  • Application Note 701: Using the DS32kHz with Dallas Real-Time Clocks - DS1390, DS1393, DS1391, DS1392
  • Application Note 2361: Interfacing an SPI-Interface RTC with a PIC Microcontroller - DS1390, DS1391
  • Application Note 2833: Interfacing an SPI RTC with a Motorola DSP - DS1390, DS1391
  • Application Note 3313: Interfacing a DS1390/DS1391 RTC with a Motorola DSP with SPI - DS1390, DS1391
  • Application Note 3510: Interfacing a DS1305 RTC with an 8051-Type Microcontroller - DS1393, DS1392
  • Application Note 3517: Estimating Super Capacitor Backup Time on Trickle-Charger Real-Time Clocks - DS1393, DS1390, DS1391, DS1392
  • Application Note 3816: Selecting a Backup Source for Real-Time Clocks - DS1393, DS1390, DS1391, DS1392

    Evaluation Kits
    none

    Design Guides
  • Real-Time Clocks (PDF)

    Reliability Reports
  • Reliability Report: DS1390.pdf DS1391.pdf DS1392.pdf DS1393.pdf DS1394.pdf
  • Underwriters Laboratories (UL®) Recognized

    Software/Models
    none

    Ordering Information
    Notes:

    1. Other options and links for purchasing parts are listed at: http://www.maxim-ic.com/sales.
    2. Didn't Find What You Need? Ask our applications engineers. Expert assistance in finding parts, usually within one business day.
    3. Part number suffixes: T or T&R = tape and reel; + = RoHS/lead-free; # = RoHS/lead-exempt. More: SeeFull Data Sheet or Part Naming Conventions.
    4. * Some packages have variations, listed on the drawing. "PkgCode/Variation" tells which variation the product uses. Note that "+", "#", "-" in the part number suffix describes RoHS status. Package drawings may show a different suffix character.


    Devices: 1-29 of 29

    DS1390 Free
    Sample
    Buy
    Package: TYPE PINS FOOTPRINT
      DRAWING CODE/VAR *
    Temp RoHS/Lead-Free?
    Materials Analysis
    DS1390U-3+T&R  
    uMAX;10 pin;
    Dwg: 21-0061 (PDF)
    Use pkgcode/variation: U10+2*
    -40°C to +85°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    DS1390U-3+  
    uMAX;10 pin;
    Dwg: 21-0061 (PDF)
    Use pkgcode/variation: U10+2*
    -40°C to +85°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    DS1390U-18+  
    uMAX;10 pin;
    Dwg: 21-0061 (PDF)
    Use pkgcode/variation: U10+2*
    -40°C to +85°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    DS1390U-33+T&R  
    uMAX;10 pin;
    Dwg: 21-0061 (PDF)
    Use pkgcode/variation: U10+2*
    -40°C to +85°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    DS1390U-33  
    uMAX;10 pin;
    Dwg: 21-0061 (PDF)
    Use pkgcode/variation: U10-2*
    -40°C to +85°C RoHS/Lead-Free: No
    Materials Analysis
    DS1390U-3  
    uMAX;10 pin;
    Dwg: 21-0061 (PDF)
    Use pkgcode/variation: U10-2*
    -40°C to +85°C RoHS/Lead-Free: No
    Materials Analysis
    DS1390U-18  
    uMAX;10 pin;
    Dwg: 21-0061 (PDF)
    Use pkgcode/variation: U10-2*
    -40°C to +85°C RoHS/Lead-Free: No
    Materials Analysis
    DS1390U-33+  
    uMAX;10 pin;
    Dwg: 21-0061 (PDF)
    Use pkgcode/variation: U10+2*
    -40°C to +85°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    DS1391 Free
    Sample
    Buy
    Package: TYPE PINS FOOTPRINT
      DRAWING CODE/VAR *
    Temp RoHS/Lead-Free?
    Materials Analysis
    DS1391U-33+T&R  
    uMAX;10 pin;
    Dwg: 21-0061 (PDF)
    Use pkgcode/variation: U10+2*
    -40°C to +85°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    DS1391U-33/T&R  
    uMAX;10 pin;
    Dwg: 21-0061 (PDF)
    Use pkgcode/variation: U10-2*
    -40°C to +85°C RoHS/Lead-Free: No
    Materials Analysis
    DS1391U-33+  
    uMAX;10 pin;
    Dwg: 21-0061 (PDF)
    Use pkgcode/variation: U10+2*
    -40°C to +85°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    DS1391U-3+  
    uMAX;10 pin;
    Dwg: 21-0061 (PDF)
    Use pkgcode/variation: U10+2*
    -40°C to +85°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    DS1391U-18+  
    uMAX;10 pin;
    Dwg: 21-0061 (PDF)
    Use pkgcode/variation: U10+2*
    -40°C to +85°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    DS1391U-3+T&R  
    uMAX;10 pin;
    Dwg: 21-0061 (PDF)
    Use pkgcode/variation: U10+2*
    -40°C to +85°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    DS1391U-18  
    uMAX;10 pin;
    Dwg: 21-0061 (PDF)
    Use pkgcode/variation: U10-2*
    -40°C to +85°C RoHS/Lead-Free: No
    Materials Analysis
    DS1391U-3  
    uMAX;10 pin;
    Dwg: 21-0061 (PDF)
    Use pkgcode/variation: U10-2*
    -40°C to +85°C RoHS/Lead-Free: No
    Materials Analysis
    DS1391U-33  
    uMAX;10 pin;
    Dwg: 21-0061 (PDF)
    Use pkgcode/variation: U10-2*
    -40°C to +85°C RoHS/Lead-Free: No
    Materials Analysis
    DS1392 Free
    Sample
    Buy
    Package: TYPE PINS FOOTPRINT
      DRAWING CODE/VAR *
    Temp RoHS/Lead-Free?
    Materials Analysis
    DS1392U-33  
    uMAX;10 pin;
    Dwg: 21-0061 (PDF)
    Use pkgcode/variation: U10-2*
    -40°C to +85°C RoHS/Lead-Free: No
    Materials Analysis
    DS1392U-18+  
    uMAX;10 pin;
    Dwg: 21-0061 (PDF)
    Use pkgcode/variation: U10+2*
    -40°C to +85°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    DS1392U-3+  
    uMAX;10 pin;
    Dwg: 21-0061 (PDF)
    Use pkgcode/variation: U10+2*
    -40°C to +85°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    DS1392U-33+  
    uMAX;10 pin;
    Dwg: 21-0061 (PDF)
    Use pkgcode/variation: U10+2*
    -40°C to +85°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    DS1393 Free
    Sample
    Buy
    Package: TYPE PINS FOOTPRINT
      DRAWING CODE/VAR *
    Temp RoHS/Lead-Free?
    Materials Analysis
    DS1393U-18+T&R  
    uMAX;10 pin;
    Dwg: 21-0061 (PDF)
    Use pkgcode/variation: U10+2*
    -40°C to +85°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    DS1393U-33+  
    uMAX;10 pin;
    Dwg: 21-0061 (PDF)
    Use pkgcode/variation: U10+2*
    -40°C to +85°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    DS1393U-3+  
    uMAX;10 pin;
    Dwg: 21-0061 (PDF)
    Use pkgcode/variation: U10+2*
    -40°C to +85°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    DS1393U-18+  
    uMAX;10 pin;
    Dwg: 21-0061 (PDF)
    Use pkgcode/variation: U10+2*
    -40°C to +85°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    DS1393U-18  
    uMAX;10 pin;
    Dwg: 21-0061 (PDF)
    Use pkgcode/variation: U10-2*
    -40°C to +85°C RoHS/Lead-Free: No
    Materials Analysis
    DS1393U-33  
    uMAX;10 pin;
    Dwg: 21-0061 (PDF)
    Use pkgcode/variation: U10-2*
    -40°C to +85°C RoHS/Lead-Free: No
    Materials Analysis
    DS1394 Free
    Sample
    Buy
    Package: TYPE PINS FOOTPRINT
      DRAWING CODE/VAR *
    Temp RoHS/Lead-Free?
    Materials Analysis
    DS1394U-33+  
    uMAX;10 pin;
    Dwg: 21-0061 (PDF)
    Use pkgcode/variation: U10+2*
    -40°C to +85°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    DS1394U-33+T&R  
    uMAX;10 pin;
    Dwg: 21-0061 (PDF)
    Use pkgcode/variation: U10+2*
    -40°C to +85°C RoHS/Lead-Free: Lead Free
    Materials Analysis

    More Information
  • New Product Press Release 2004-07-29 
  • Product Ad: Download
  • Super Capacitor Calculator

    Related Products
    DS1302 Trickle-Charge Timekeeping Chip
    DS1306 Serial Alarm Real-Time Clock
    DS1305 Serial Alarm Real-Time Clock
    MAX6902 SPI-Compatible RTC in a TDFN
    MAX6901 3-Wire Serial RTC in a TDFN

    Didn't Find What You Need?
  • Next Day Product Selection Assistance from Applications Engineers
  • Parametric Search
  • Applications Help
  •  QuickView   Technical Documents   Ordering Info   More Information  
     Description 
     Key Features 
     Applications/Uses 
     Key Specifications 
     Diagram 

     Data Sheet 
     Application Notes 
     Design Guides 
     Engineering Journals 
     Reliability Reports 
     Software/Models 
     Evaluation Kits 

     Price and Availability 
     Samples 
     Buy Online 
     Package Information 
     Lead-Free Information 

     Related Products 
     Notes and Comments 
     Evaluation Kits 

    2008-08-08
    This page last modified: 2008-11-17



          Privacy Policy    Legal Notices

          Copyright © 2008 by Maxim Integrated Products, Dallas Semiconductor