ENGLISH 简体中文 日本語 한국어  

    로그인 | 회원가입 


   
 
키워드나 부품번호를 입력해주세요    



DS2408
1-Wire 8채널 주소지정이 가능한 스위치

단일 통신 라인으로 구동되고 동작하는 8채널 양방향 포트 익스팬더


  QuickView     기술 자료     주문 정보     추가 정보     사용자 의견 (0)     전체  
상태
부품번호 상태
DS2408 구매 가능: 생산 중. 일부 버전은 더 이상 제공되지 않습니다. 주문 정보를 참조하십시오.

데이터 시트
전체 데이터 시트 (PDF, 224kB)
English Download this datasheet in PDF format다운로드

제품 설명
The DS2408 is an 8-channel, programmable I/O 1-Wire® chip. PIO outputs are configured as open-drain and provide an on resistance of 100Ω max. A robust PIO channel-access communication protocol ensures that PIO output-setting changes occur error-free. A data-valid strobe output can be used to latch PIO logic states into external circuitry such as a D/A converter (DAC) or microcontroller data bus.

DS2408 operation is controlled over the single-conductor 1-Wire bus. Device communication follows the standard Dallas Semiconductor 1-Wire protocol. Each DS2408 has its own unalterable and unique 64-bit ROM registration number that is factory lasered into the chip. The registration number guarantees unique identification and is used to address the device in a multidrop 1-Wire net environment. Multiple DS2408 devices can reside on a common 1-Wire bus and can operate independently of each other. The DS2408 also supports 1-Wire conditional search capability based on PIO conditions or power-on-reset activity; the conditions to cause participation in the conditional search are programmable. The DS2408 has an optional VCC supply connection. When an external supply is absent, device power is supplied parasitically from the 1-Wire bus. When an external supply is present, PIO states are maintained in the absence of the 1-Wire bus power source. The RSTZ signal is configurable to serve as either a hard-wired reset for the PIO output or as a strobe for external circuitry to indicate that a PIO write or PIO read has completed.

주요기능   애플리케이션/용도
  • Eight Channels of Programmable I/O with Open-Drain Outputs
  • On-Resistance of PIO Pulldown Transistor 100Ω (max); Off-Resistance 10MΩ (typ)
  • Individual Activity Latches Capture Asynchronous State Changes at PIO Inputs for Interrogation by the Bus Master
  • Data-Strobe Output to Synchronize PIO Logic States to External Read/Write Circuitry
  • Built-in Multidrop Controller Ensures Compatibility with Other Dallas Semiconductor 1-Wire Net Products
  • Supports 1-Wire Conditional Search Command with Response Controlled by Programmable PIO Conditions
  • Unique Factory-Lasered 64-Bit Registration Number Ensures Error-Free Device Selection and Absolute Part Identity
  • Communicates to Host with a Single Digital Signal at 15.3kbps or 100kbps using 1-Wire Protocol

 
  • 교환국 스위치, 무선 기지국 및 PBX 등의 산업용 제어 계측 시험 및 측정 랙 기반 시스템 (DS2408)

    다이어그램
    블록 다이어그램

    애플리케이션 노트
  • 애플리케이션 노트 27: Maxim iButton 제품에서 CRC의 이해와 사용 - DS2408
  • 애플리케이션 노트 74: Reading and Writing 1-Wire® Devices Through Serial Interfaces - DS2408
  • 애플리케이션 노트 119: FPGA 또는 ASIC에서 1-Wire® Master 임베딩 - DS2408
  • 애플리케이션 노트 120: API를 사용하는 DS1WM 1-Wire® 버스 마스터 제어 - DS2408
  • 애플리케이션 노트 155: 1-Wire® 소프트웨어 리소스 가이드 소자 설명 - DS2408
  • 애플리케이션 노트 187: 1-Wire Search Algorithm - DS2408
  • 애플리케이션 노트 192: DS2480B 직렬 1-Wire 라인 드라이버 사용 - DS2408
  • 애플리케이션 노트 3438: 직렬 디지털 데이터 네트워크 - DS2408
  • 애플리케이션 노트 4627: A Simple 1-Wire® DAC - DS2408

    디자인 가이드
  • Interface (PDF)
  • 1-Wire® Products (PDF)

    신뢰성 보고서
  • 신뢰성 보고서: DS2408.pdf

    소프트웨어/모델
    없음

    주문 정보
    참고:

    1. 부품을 구매하기 위한 기타 옵션 및 링크는 http://korea.maxim-ic.com/sales에 실려 있습니다.
    2. 필요한 것을 찾지 못하셨나요? Maxim 애플리케이션 엔지니어에게 문의하십시오. 부품을 찾는데 필요한 전문가의 도움이 보통 업무일 1일 이내에 제공됩니다.
    3. 부품번호 suffix: T 또는 T&R = 테잎 앤 릴, + = RoHS/lead-free, # = RoHS/lead 예외.추가 정보: 전체 데이터 시트 또는 부품번호 규칙
    4. *일부 패키지는 크기 편차(variation)를 가지며 이 값은 도면 상에 제시되어 있습니다. “패키지 코드/편차”는 해당 제품이 사용하고 있는 편차를 보여줍니다. 부품번호 suffix에 "+", "#", "-"는 RoHS 준수 상태를 나타냅니다. 패키지 도면에 suffix 문자는 다를 수 있습니다.


    소자: 1-4 / 4

    DS2408 무료 샘플 구매 상태 권장 대체품
    패키지: 타입 핀 풋프린트
      도면 코드/편차 *
    온도 RoHS/Lead-Free?
    재료 분석
    DS2408S/T&R     N/A No Longer Available DS2408S+


    랜드 패턴: 없음

    -40°C ~ +85°C 데이터 시트 보기
    DS2408S+T&R    
    구매 가능
    SOIC(N),16 핀,62 mm²
    도면: 21-0041 (PDF)
    랜드 패턴: 90-0097 (PDF)
    패키지 코드/편차 이용: S16+5*
    -40°C ~ +85°C RoHS/Lead-Free: Lead-Free
    재료 분석
    DS2408S     N/A No Longer Available DS2408S+
    SOIC(N),16 핀,62 mm²
    도면: 21-0041 (PDF)
    랜드 패턴: 90-0097 (PDF)
    패키지 코드/편차 이용: S16-1*
    -40°C ~ +85°C RoHS/Lead-Free: 아니오
    재료 분석
    DS2408S+  
    구매 가능
    SOIC(N),16 핀,62 mm²
    도면: 21-0041 (PDF)
    랜드 패턴: 90-0097 (PDF)
    패키지 코드/편차 이용: S16+5*
    -40°C ~ +85°C RoHS/Lead-Free: Lead-Free
    재료 분석

    추가 정보
  • 신제품 보도자료: 2003-04-18 

    관련된 제품군

    관련 정보: 비슷한 제품군 보기

    필요한 것을 찾지 못하셨나요?
  • 익일에 제공되는 애플리케이션 엔지니어의 제품 선택 조언
  • 파라메트릭 검색
  • 애플리케이션 도움말
  •  QuickView   기술 자료   주문 정보   추가 정보  
     제품 설명 
     주요기능 
     애플리케이션/용도 
     주요 사양 
     다이어그램 

     데이터 시트 
     애플리케이션 노트 
     디자인 가이드 
     Engineering Journal 
     신뢰성 보고서 
     소프트웨어/모델 
     EV 킷 

     가격 및 재고 유모 
     샘플 
     온라인 구매 
     패키지 정보 
     Lead-Free 정보 

     관련된 제품군 
     참고 사항 
     EV 킷 

    문서 레퍼런스 xxx; 2004-06-23
    이 페이지는 최근에 변경됨: 2009-06-30


            •         •         •     개인정보보호 정책     •     법적 고지

        Copyright © 2009 by Maxim Integrated Products