ENGLISH 简体中文 日本語 한국어  

MAX8535, MAX8536, MAX8585
ORing MOSFET Controllers with Fastest Fault Isolation for Redundant Power Supplies

Simplest, smallest OR-ing MOSFET Controllers with Fastest Reverse-Current Protection


  QuickView     Technical Documents     Ordering Info     More Information     User Comments (0)     All  
Data Sheet
FULL DATA SHEET (PDF, 304kB)
Download this datasheet in PDF formatDownload   Send this datasheet to any email addressE-Mail


Description
Critical loads often employ parallel-connected power supplies with redundancy in order to enhance system reliability. The MAX8535/MAX8536/MAX8585 are highly integrated but inexpensive MOSFET controllers that provide isolation and redundant power capability in high-reliability systems. The MAX8535/MAX8585 are used in 12V systems, and have an internal charge pump to drive the gates of the n-channel pass elements to VCC + 10V. The MAX8536 is used in 3.3V and 5V systems, with a chargepump output of VCC + 5V.

During startup, the MAX8535/MAX8536/MAX8585 monitor the voltage drop across external MOSFETs. Once VCC approaches or exceeds the bus voltage, the MOSFETs are turned on. The MAX8535/MAX8536/MAX8585 feature a dual-purpose TIMER input. A single external resistor from TIMER to ground sets the turn-on speed of the external MOSFETs. Optionally, the TIMER input can be used as a logic-enable pin. Once the device is turned on, the MAX8535/MAX8536/MAX8585 monitor the load, protecting against overvoltage, undervoltage, and reverse-current conditions.

Overvoltage and undervoltage fault thresholds are adjustable and can be disabled. The current-limit trip points are set by the external MOSFETs' RDS(ON), reducing component count. An open-drain logic-low fault output indicates if an overvoltage, undervoltage, or reverse-current fault occurs.

All devices come in a space-saving 8-pin µMAX® package and are specified over the extended -40°C to +85°C temperature range.

Key Features   Applications/Uses
  • Simple, Integrated, and Inexpensive ORing MOSFET Controller
  • ORing MOSFET Drive for 12V (MAX8535/MAX8585) and 3.3V or 5V (MAX8536) Bus
  • Eliminates ORing Diode Power Dissipation and Reverse Leakage Current
  • Provides N + 1 Redundant Supply Capability for Highly Reliable Systems
  • Isolates Failed Supply from Output Bus in <1µs
  • Reverse-Current Flow Detection
  • Programmable Soft-Start
  • Logic-Enable Input
  • Adjustable Overvoltage and Undervoltage Trip Points
  • Fault-Indicator Output
  • Space-Saving 8-Pin µMAX Package

 
  • Network/Telecom Power Supplies
  • On-Board Redundant Power Supplies in Blade Servers
  • Rectifiers
  • Redundant Power Supplies in High-Availability Systems
  • Silver Box Supplies for Servers

    Key Specifications:   ORing MOSFET Controllers
    Part Number Reverse Current Protection Under-Voltage Protection Charge-Pump Capacitor Soft Start Enable Fault Indicator EV-Kit RoHS Available Package Operating Temp. Range (°C) Price**
    MAX8535  Yes Yes Yes Yes Yes Yes Yes Yes uMAX/8 -40 to +85 $1.50 @ 1k
    MAX8536  $1.50 @ 1k
    See All ORing MOSFET Controllers (5)
    Notes:
    **This pricing is BUDGETARY, for comparing similar parts. Prices are in U.S. dollars and subject to change. Quantity pricing may vary substantially and international prices may differ due to local duties, taxes, fees, and exchange rates. For volume-specific prices and delivery, please see the price and availability page or contact an authorized distributor.

    Diagram
    MAX8535, MAX8536, MAX8585: Typical Operating Circuit
    Typical Operating Circuit

    Evaluation Kits
  • MAX8535EVKIT
  • MAX8536EVKIT

    Reliability Reports
  • Show FIT data for:
  • Request Reliability Report for:

    Software/Models
    none

    Ordering Information
    Notes:

    1. Other options and links for purchasing parts are listed at: http://www.maxim-ic.com/sales.
    2. Didn't Find What You Need? Ask our applications engineers. Expert assistance in finding parts, usually within one business day.
    3. Part number suffixes: T or T&R = tape and reel; + = RoHS/lead-free; # = RoHS/lead-exempt. More: SeeFull Data Sheet or Part Naming Conventions.
    4. * Some packages have variations, listed on the drawing. "PkgCode/Variation" tells which variation the product uses. Note that "+", "#", "-" in the part number suffix describes RoHS status. Package drawings may show a different suffix character.


    Devices: 1-14 of 14

    MAX8535 Free
    Sample
    Buy
    Package: TYPE PINS FOOTPRINT
      DRAWING CODE/VAR *
    Temp RoHS/Lead-Free?
    Materials Analysis
    MAX8535EUA  
    uMAX;8 pin;
    Dwg: 21-0036 (PDF)
    Use pkgcode/variation: U8-1*
    -40°C to +85°C RoHS/Lead-Free: No
    Materials Analysis
    MAX8535EUA-T  
    uMAX;8 pin;
    Dwg: 21-0036 (PDF)
    Use pkgcode/variation: U8-1*
    -40°C to +85°C RoHS/Lead-Free: No
    Materials Analysis
    MAX8535AEUA-T  
    uMAX;8 pin;
    Dwg: 21-0036 (PDF)
    Use pkgcode/variation: U8-1*
    -40°C to +85°C RoHS/Lead-Free: No
    Materials Analysis
    MAX8535EUA+  
    uMAX;8 pin;
    Dwg: 21-0036 (PDF)
    Use pkgcode/variation: U8+1*
    -40°C to +85°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    MAX8535EUA+T  
    uMAX;8 pin;
    Dwg: 21-0036 (PDF)
    Use pkgcode/variation: U8+1*
    -40°C to +85°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    MAX8535AEUA  
    uMAX;8 pin;
    Dwg: 21-0036 (PDF)
    Use pkgcode/variation: U8-1*
    -40°C to +85°C RoHS/Lead-Free: No
    Materials Analysis
    MAX8536 Free
    Sample
    Buy
    Package: TYPE PINS FOOTPRINT
      DRAWING CODE/VAR *
    Temp RoHS/Lead-Free?
    Materials Analysis
    MAX8536EUA+  
    uMAX;8 pin;
    Dwg: 21-0036 (PDF)
    Use pkgcode/variation: U8+1*
    -40°C to +85°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    MAX8536EUA+T  
    uMAX;8 pin;
    Dwg: 21-0036 (PDF)
    Use pkgcode/variation: U8+1*
    -40°C to +85°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    MAX8536EUA-T  
    uMAX;8 pin;
    Dwg: 21-0036 (PDF)
    Use pkgcode/variation: U8-1*
    -40°C to +85°C RoHS/Lead-Free: No
    Materials Analysis
    MAX8536EUA  
    uMAX;8 pin;
    Dwg: 21-0036 (PDF)
    Use pkgcode/variation: U8-1*
    -40°C to +85°C RoHS/Lead-Free: No
    Materials Analysis
    MAX8585 Free
    Sample
    Buy
    Package: TYPE PINS FOOTPRINT
      DRAWING CODE/VAR *
    Temp RoHS/Lead-Free?
    Materials Analysis
    MAX8585EUA+  
    uMAX;8 pin;
    Dwg: 21-0036 (PDF)
    Use pkgcode/variation: U8+1*
    -40°C to +85°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    MAX8585EUA+T  
    uMAX;8 pin;
    Dwg: 21-0036 (PDF)
    Use pkgcode/variation: U8+1*
    -40°C to +85°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    MAX8585EUA  
    uMAX;8 pin;
    Dwg: 21-0036 (PDF)
    Use pkgcode/variation: U8-1*
    -40°C to +85°C RoHS/Lead-Free: No
    Materials Analysis
    MAX8585EUA-T  
    uMAX;8 pin;
    Dwg: 21-0036 (PDF)
    Use pkgcode/variation: U8-1*
    -40°C to +85°C RoHS/Lead-Free: No
    Materials Analysis

    More Information
  • New Product Press Release 2003-02-28 

    Didn't Find What You Need?
  • Next Day Product Selection Assistance from Applications Engineers
  • Parametric Search
  • Applications Help
  •  QuickView   Technical Documents   Ordering Info   More Information  
     Description 
     Key Features 
     Applications/Uses 
     Key Specifications 
     Diagram 

     Data Sheet 
     Application Notes 
     Design Guides 
     Engineering Journals 
     Reliability Reports 
     Software/Models 
     Evaluation Kits 

     Price and Availability 
     Samples 
     Buy Online 
     Package Information 
     Lead-Free Information 

     Related Products 
     Notes and Comments 
     Evaluation Kits 

    Document Ref.: 19-2735; Rev 1; 2004-05-03
    This page last modified: 2008-03-13



          Privacy Policy    Legal Notices

          Copyright © 2008 by Maxim Integrated Products, Dallas Semiconductor