The MAX1421 is a 3.3V, 12-bit analog-to-digital converter
(ADC), featuring a fully-differential input,
pipelined, 12-stage ADC architecture with wideband
track-and-hold (T/H) and digital error correction incorporating
a fully-differential signal path. The MAX1421 is
optimized for low-power, high-dynamic performance
applications in imaging and digital communications.
The converter operates from a single 3.3V supply, consuming
only 188mW while delivering a typical signal-to-noise
ratio (SNR) of 66dB at an input frequency of
15MHz and a sampling frequency of 40Msps. The fully-differential
input stage has a small signal -3dB bandwidth
of 400MHz and may be operated with
single-ended inputs.
An internal 2.048V precision bandgap reference sets
the full-scale range of the ADC. A flexible reference
structure accommodates an internal or externally
applied buffered or unbuffered reference for applications
requiring increased accuracy or a different input
voltage range.
In addition to low operating power, the MAX1421 features
two power-down modes, a reference power-down
and a shutdown mode. In reference power-down, the
internal bandgap reference is deactivated, resulting in
a typical 2mA supply current reduction. For idle periods,
a full shutdown mode is available to maximize
power savings.
The MAX1421 provides parallel, offset binary, CMOS-compatible
three-state outputs.
The MAX1421 is available in a 7mm x 7mm, 48-pin
TQFP package, and is specified over the commercial
(0°C to +70°C) and the extended industrial (-40°C to
+85°C) temperature ranges.
Pin-compatible higher- and lower-speed versions of the
MAX1421 are also available. Please refer to the
MAX1420 data sheet for a frequency of 60Msps and
the MAX1422 data sheet for a frequency of 20Msps.
Notes: **This pricing is BUDGETARY, for comparing similar parts. Prices are in
U.S. dollars and subject to change. Quantity pricing may vary
substantially and international prices may differ due to local
duties, taxes, fees, and exchange rates. For volume-specific prices
and delivery, please see the price and availability page
or contact an authorized distributor.
필요한 것을 찾지 못하셨나요?
Maxim 애플리케이션 엔지니어에게 문의하십시오. 부품을 찾는데 필요한 전문가의 도움이 보통 업무일 1일 이내에 제공됩니다.
부품번호 suffix: T 또는 T&R = 테잎 앤 릴,
+ = RoHS/lead-free,
# = RoHS/lead 예외.추가 정보:전체 데이터 시트또는 부품번호 규칙
* 일부 패키지는 크기 편차(variation)를 가지며 이 값은 도면 상에 제시되어 있습니다. “패키지 코드/편차”는 해당 제품이 사용하고 있는 편차를 보여줍니다. 부품번호 suffix에 "+", "#", "-"는 RoHS 준수 상태를 나타냅니다. 패키지 도면에 suffix 문자는 다를 수 있습니다.
다운로드