The DS9094SM is a low-cost, surface-mount device that retains a 16.3mm ibutton on a printed circuit board. Two springs that double as ground contacts press the ibutton to the data pad on the printed circuit board. The ibutton can be inserted and extracted without special tools. For best results the data contact on the printed circuit board should be plated with a layer of minimum 0.76µm hard gold over minimum 3.81µm nickel.
주요기능
Compact Single-Piece, All-Metal Clip for ibutton® Mounting
Lowest Profile ibutton Mount
Made from 0.25mm Thick Tin-Plated Phosphor Bronze
Withstands High Temperatures Required for Surface Mounting
Can be Soldered, Riveted, or Screw-Mounted
Compatible with Leaded and Lead-Free Solder Processes
다운로드