ENGLISH 简体中文 日本語 한국어  

DS2502-E64
IEEE EUI-64ノードアドレスチップ


  クイックビュー     技術資料     オーダー情報     その他の情報     ユーザのコメント (0)     すべて表示  
データシート
フルデータシート (PDF, 47kB)
英語 Download this datasheet in PDF formatダウンロードする

製品概要
The DS2502-E64 is a variant of the DS2502 1024-bit add-only memory. It differs from the standard DS2502 in its custom ROM family code 89H, and the UniqueWare™ identifier 5E7 in place of the upper 12 bits of the standard ROM serialization field. Otherwise, the electrical and logical behavior is identical to that of the DS2502. For technical details please refer to the DS2502 data sheet. The first 32 bytes of the DS2502-E64's EPROM memory contain a globally unique 64-bit node address (EUI-64) and are write-protected. The data structure follows the conventions of UniqueWare devices using default data structure (Figure 1 of data sheet).

The data record starts with a length byte (0CH) and the 4-byte UniqueWare project ID 00001128H. The next eight bytes contain the EUI-64 global identifier (node address), which consists of an incrementing 40-bit extension identifier and the IEEE®-assigned 24-bit company ID value 006035H. A 16-bit CRC ends the data record. The remaining bytes of the 32-byte memory page remain unprogrammed. Neither the 40-bit extension identifier nor the 24-bit company ID are related to the 64-bit ROM registration number, which is distinct from the IEEE standard 1394-1995 node address. The ROM registration number is used to provide a unique address to access the DS2502-E64 when multidropped on a 1-Wire® bus.

主な特長
  • IEEE-approved factory programmed 64-bit node address chip (EUI-64) with 768 bits user-programmable OTP-EPROM communicates with the economy of one signal plus ground
  • Meets the node identification requirements of IEEE standard 1394-1995 (FireWire™)
  • Unique, factory-lasered 64-bit registration number assures absolute traceability because no two parts are alike
  • Built-in multidrop controller ensures compatibility with other 1-Wire products
  • Device is an add-only memory where additional data can be programmed into EPROM without disturbing existing data
  • Reduces control, address, data, power, and programming signals to a single pin
  • Directly connects to a single port pin of a microprocessor and communicates at up to 16.3kbps
  • Low cost TO-92 or TSOC surface mount packages
  • Reads over a wide voltage range of 2.8V to 6.0V from -40°C to +85°C; programs at 11.5V to 12.0V from -40°C to +50°C

Key Specifications:   Memory (EPROM, EEPROM, ROM, NV SRAM)
Part Number Memory Type Memory Size Bus Type Real-Time Clock DIP with Internal Battery PowerCap Package Battery Monitor With GPIO Single Piece Module Features Supply Voltage (min) (V) Supply Voltage (max) (V) Price**
DS2502-E64  EPROM 1K x 1 1-Wire No No No No No No
Add-Only Memory
IEEE EUI-64 Node Address
2.8 6 $1.30 @ 1k
See All Memory (EPROM, EEPROM, ROM, NV SRAM) (69)
Notes:
**This pricing is BUDGETARY, for comparing similar parts. Prices are in U.S. dollars and subject to change. Quantity pricing may vary substantially and international prices may differ due to local duties, taxes, fees, and exchange rates. For volume-specific prices and delivery, please see the price and availability page or contact an authorized distributor.

評価キット
なし

デザインガイド
  • 1-Wire®製品 (PDF)

    信頼性レポート
  • 信頼性レポートの請求: (English only)

    ソフトウェア/モデル
    なし

    オーダー情報
    注:

    1. 製品購入のための方法およびリンク:http://japan.maxim-ic.com/sales
    2. 必要な情報が見つかりませんか?マキシムのアプリケーションエンジニアに質問してください。通常翌営業日以内に、製品を探すための専門的なお手伝いをします。
    3. 型番サフィックス:TまたはT&R = テープ&リール、 + = RoHS/鉛フリー、# = RoHS/鉛免除。詳細:フルデータシートまたはマキシム製品の型番の見方を参照。
    4. *パッケージの中にはいくつかのバリエーションがあるものがあり、図面に記載されています。「パッケージコード/バリエーション」は製品が使用しているバリエーションを示しています。型番サフィックスにある「+」、「#」、「-」はRoHSステータスを表わすことに注意してください。パッケージ図面は異なるサフィックス文字を示すことがあります。


    デバイス: 1-4 / 4

    DS2502-E64 注釈 無料
    サンプル
    直接購入 (English Only)
    パッケージ: タイプ ピン数 実装面積
      図面コード/バリエーション *
    温度範囲 RoHS/鉛フリー
    成分分析
    DS2502-E64   IEEE EUI-64ノードID
    TO92、3ピン、
    図面: 21-0248 (PDF)
    使用パッケージコード/バリエーション:Q3-1*
    -40℃~+85℃ RoHS/鉛フリー:非対応
    成分分析
    DS2502-E64+  
    TO92、3ピン、
    図面: 21-0248 (PDF)
    使用パッケージコード/バリエーション:Q3+1*
    -40℃~+85℃ RoHS/鉛フリー:鉛フリー
    成分分析
    DS2502P-E64   IEEE EUI-64ノードID
    TSOC、6ピン、
    図面: 21-0382 (PDF)
    使用パッケージコード/バリエーション:D6-1*
    -40℃~+85℃ RoHS/鉛フリー:非対応
    成分分析
    DS2502P-E64+  
    TSOC、6ピン、
    図面: 21-0382 (PDF)
    使用パッケージコード/バリエーション:D6+1*
    -40℃~+85℃ RoHS/鉛フリー:鉛フリー
    成分分析

    その他の情報
  • センサ較正 (English only)

    お探しの製品が見つかりませんか?
  • アプリケーションエンジニアによる製品選択サポート(翌営業日中に回答)
  • パラメトリック検索
  • アプリケーションヘルプ
  •  クイックビュー   技術資料   オーダー情報   その他の情報  
     製品概要 
     主な特長 
     アプリケーション/用途 
     主要スペック 
      

     データシート 
     アプリケーションノート 
     デザインガイド 
     エンジニアリングジャーナル 
     信頼性レポート 
     ソフトウェア/モデル 
     評価キット 

     価格および入手性 
     サンプル 
     オンライン購入 
     パッケージ情報 
     鉛フリー情報 

     関連製品 
     注記およびコメント 
     評価キット 

    1999-10-20
    このページの最終更新日: 2007-06-22



          プライバシーポリシー    法的お知らせ

          Copyright © 2008 by Maxim Integrated Products, Dallas Semiconductor