ENGLISH 简体中文 日本語 한국어  

    로그인 | 회원가입 


   
 
키워드나 부품번호를 입력해주세요    



DS2430A, DS2430AP
256비트 1-Wire EEPROM

새로운 설계를 위한 권장 업그레이드
부품번호 대체품 설명
DS2430A DS2431 DS2430A는 새로운 설계에 더 이상 권장하지 않습니다. 대체품으로 DS2431 1024비트 1-Wire EEPROM을 권장합니다.
DS2430A+ DS2431
DS2430AX DS2431
DS2430AX-S DS2431
DS2430AX-S# DS2431
DS2430AX# DS2431
DS2430AX#U DS2431
DS2430A-001-00 DS2431
DS2430A-002-E1 DS2431
DS2430A-001-01 DS2431
DS2430A-001-02 DS2431
DS2430A-001-03 DS2431
DS2430A-001-04 DS2431
DS2430A-001-05 DS2431
DS2430A-001-06 DS2431
DS2430A-001-07 DS2431
DS2430A-001-08 DS2431
DS2430A-001-09 DS2431


  QuickView     기술 자료     주문 정보     추가 정보     사용자 의견 (0)     전체  
제품 설명
전체 데이터 시트 (PDF, 1.6MB)
English Download this datasheet in PDF format다운로드
The DS2430A 256-bit 1-Wire® EEPROM identifies and stores relevant information about the product to which it is associated. This lot or product specific information can be accessed with minimal interface, for example a single port pin of a microcontroller. The DS2430A consists of a factory-lasered registration number that includes a unique 48-bit serial number, an 8-bit CRC, and an 8-bit Family Code (14h) plus 256 bits of user-programmable EEPROM and a 64-bit one-time programmable application register. The power to read and write the DS2430A is derived entirely from the 1-Wire communication line. Data is transferred serially via the 1-Wire protocol, which requires only a single data lead and a ground return. The 48-bit serial number that is factory-lasered into each DS2430A provides a guaranteed unique identity that allows for absolute traceability. The TO-92 and TSOC packages provide a compact enclosure that allows standard assembly equipment to handle the device easily for attachment to printed circuit boards or wiring. Typical applications include storage of calibration constants, board identification, and product revision status.

주요기능   애플리케이션/용도
  • 256-bit Electrically Erasable Programmable Read Only Memory (EEPROM) plus 64-bit one-time programmable application register
  • Unique, factory-lasered and tested 64-bit registration number (8-bit family code + 48-bit serial number + 8-bit CRC tester) assures absolute identity because no two parts are alike
  • Built-in multidrop controller ensures compatibility with other MicroLAN products
  • EEPROM organized as one page of 32 bytes for random access
  • Reduces control, address, data, and power to a single data pin
  • Directly connects to a single port pin of a microprocessor and communicates at up to 16.3kbits per second
  • 8-bit family code specifies DS2430A communication requirements to reader
  • Presence detector acknowledges when reader first applies voltage
  • Low cost TO-92 or 6-pin TSOC and Flip Chip surface mount package
  • Reads and writes over a wide voltage range of 2.8V to 6.0V from -40°C to +85°C

 
  • 액세서리 식별 및 제어
  • IEEE 1451.4 센서 TEDS
  • 의료용 센서
  • PCB 식별

    필요한 것을 찾지 못하셨나요?
  • 익일에 제공되는 애플리케이션 엔지니어의 제품 선택 조언
  • 파라메트릭 검색
  • 애플리케이션 도움말
  •  QuickView   기술 자료   주문 정보   추가 정보  
     제품 설명 
     주요기능 
     애플리케이션/용도 
     주요 사양 
     다이어그램 

     데이터 시트 
     애플리케이션 노트 
     디자인 가이드 
     Engineering Journal 
     신뢰성 보고서 
     소프트웨어/모델 
     EV 킷 

     가격 및 재고 유모 
     샘플 
     온라인 구매 
     패키지 정보 
     Lead-Free 정보 

     관련된 제품군 
     참고 사항 
     EV 킷 

    2007-08-08
    이 페이지는 최근에 변경됨: 2008-03-11


            •         •         •     개인정보보호 정책     •     법적 고지

        Copyright © 2009 by Maxim Integrated Products