ENGLISH 简体中文 日本語 한국어  

    로그인 | 회원가입 


   
 
키워드나 부품번호를 입력해주세요    



DS2119M
Ultra3 LVD/SE SCSI 터미네이터

새로운 설계에는 권장하지 않음
부품번호 대체품 설명
DS2119ME n/a 이 제품은 더 이상 제공되지 않습니다.
DS2119ME+ n/a 이 제품은 지난 구매 시점을 마지막으로 공급이 중단되었으며, 새로 주문하실 수 없습니다.


  QuickView     기술 자료     주문 정보     추가 정보     사용자 의견 (0)     전체  
데이터 시트
전체 데이터 시트 (PDF, 308kB)
English Download this datasheet in PDF format다운로드

제품 설명
The DS2119M Ultra3 LVD/SE SCSI terminator is both a low-voltage differential (LVD) and single-ended (SE) terminator. The multimode operation enables the designer to implement LVD in current products while allowing the end-user SE-backward compatibility with legacy devices. If the device is connected in an LVD-only bus, the DS2119M will use LVD termination. If any SE devices are connected to the bus, the DS2119M will use SE termination. This is accomplished automatically inside the part by sensing the voltage on the SCSI bus DIFFSENS line.

For the LVD termination, the DS2119M integrates two current sources with nine precision resistor strings. For the SE termination, one regulator and nine precision 110Ω resistors are used. Three DS2119M terminators are needed for a wide SCSI bus.

주요기능
  • Fully Compliant with SCSI SPI-2, SPI-3, SPI-4, Ultra160, and Ultra320
  • Provides Multimode Low-Voltage
    • Differential/Single-Ended (LVD/SE)
    • Termination for Nine Signal Line Pairs
  • Autoselection of LVD or SE Termination
  • 5% Tolerance on SE and LVD Termination Resistance
  • Low Power-Down Capacitance of 3pF
  • On-Board Thermal Shutdown Circuitry
  • SCSI Bus Hot Plug Compatible
  • Fully Supports Actively Negated SE SCSI Signals

Key Specifications:   STB and TV Tuners
Part Number Ref. Clock Freq (MHz) IF Output Freq. (MHz) Noise Fig. (typ) (dB) Supply Voltage (V) Supply Current (mA) Applications Input Frequency Range Features Footprint (mm x mm)
MAX2119  12 to 30 40 8 3.3 ±5% 100
ABS-S
925 to 2175
-75 to 0dBm dynamic range
4-40MHz variable LPF
Low Power Standby Mode
differential I/Q outputs
5.0 x 5.0
See All STB and TV Tuners (17)

애플리케이션 노트
  • 애플리케이션 노트 514: Connecting the DS2119M SCSI Terminator in Typical Applications - DS2119M

    EV 킷
    없음

    디자인 가이드
  • Interface (PDF)

    신뢰성 보고서
  • 신뢰성 보고서: DS2119M.pdf

    소프트웨어/모델
  • DS2119ME_LVD IBIS 모델

    주문 정보
    참고:

    1. 부품을 구매하기 위한 기타 옵션 및 링크는 http://korea.maxim-ic.com/sales에 실려 있습니다.
    2. 필요한 것을 찾지 못하셨나요? Maxim 애플리케이션 엔지니어에게 문의하십시오. 부품을 찾는데 필요한 전문가의 도움이 보통 업무일 1일 이내에 제공됩니다.
    3. 부품번호 suffix: T 또는 T&R = 테잎 앤 릴, + = RoHS/lead-free, # = RoHS/lead 예외.추가 정보: 전체 데이터 시트 또는 부품번호 규칙
    4. *일부 패키지는 크기 편차(variation)를 가지며 이 값은 도면 상에 제시되어 있습니다. “패키지 코드/편차”는 해당 제품이 사용하고 있는 편차를 보여줍니다. 부품번호 suffix에 "+", "#", "-"는 RoHS 준수 상태를 나타냅니다. 패키지 도면에 suffix 문자는 다를 수 있습니다.


    소자: 1-1 / 1

    DS2119M 참고 무료 샘플 구매
    패키지: 타입 핀 풋프린트
      도면 코드/편차 *
    온도 RoHS/Lead-Free?
    재료 분석
    DS2119ME   5% 9채널 LVD/SE Ultra2   N/A TSSOP,28 핀,65 mm²
    도면: 21-0066 (PDF)
    Land Pattern: 90-0171 (PDF)
    패키지 코드/편차 이용: U28-2*
    0°C ~ +70°C RoHS/Lead-Free: 아니오
    재료 분석

    필요한 것을 찾지 못하셨나요?
  • 익일에 제공되는 애플리케이션 엔지니어의 제품 선택 조언
  • 파라메트릭 검색
  • 애플리케이션 도움말
  •  QuickView   기술 자료   주문 정보   추가 정보  
     제품 설명 
     주요기능 
     애플리케이션/용도 
     주요 사양 
     다이어그램 

     데이터 시트 
     애플리케이션 노트 
     디자인 가이드 
     Engineering Journal 
     신뢰성 보고서 
     소프트웨어/모델 
     EV 킷 

     가격 및 재고 유모 
     샘플 
     온라인 구매 
     패키지 정보 
     Lead-Free 정보 

     관련된 제품군 
     참고 사항 
     EV 킷 

    2006-01-05
    이 페이지는 최근에 변경됨: 2007-07-25


            •         •         •     개인정보보호 정책     •     법적 고지

        Copyright © 2009 by Maxim Integrated Products