Dallas Semiconductor's DS1239 MicroManager is a complete monitor for processor controlled systems, with the same functionality as the DS1236 and with an additional external power supply control function.
A precision temperature-compensated reference and comparator continuously monitor the system power supply. If VCC levels breach threshold tolerance, an internal power-fail signal is generated which activates reset. When power returns to tolerance, the DS1236 holds reset for a minimum of 25ms (typically 100ms) while the power supply and processor stabilize. Optional threshold levels are available: the DS1236-5 and DS1236A-5 for resets at ±5% of a 5V supply; and the DS1236 and DS1236A for ±10% of a 5V supply.
The watchdog timer circuitry monitors software execution. If a strobe input is not driven low prior to user-set timeouts between approximately 100ms and 600ms the timer forces a processor reset.
To enable external override, the DS1236 debounces the pushbutton input and guarantees a minimum active reset pulse width of 25ms.
A switch directs SRAM power between VCC or an external battery, whichever is greater. This switched supply can also back up a CMOS microprocessor.
To enable write protection upon the detection of a power-fail condition, the chip enable output is held to within 0.3V VCC or to within 0.7V of battery input.
The DS1239 facilitates the power-up and power-down sequencing of a main power supply from a keyboard or pushbutton with input and output power supply control pins.
The DS1239 MicroManager is a complete system monitor for SRAM, microprocessor software, and systems power. The functions of power monitor, watchdog timer, power switching, write protection, and pushbutton reset are essential to reliable operation in battery-backed, processor-controlled systems. Integrated features also reduce component count, save power, simplify board layout, and save cost and space.
주요기능
Power fail detect with referenced comparator and NMI:
Warns microprocessor of an impending power failure
Holds microprocessor in check during power transients
Halts and restarts an out-of-control microprocessor
Provides orderly shutdown in nonvolatile microprocessor applications
Invokes sleep mode
Pushbutton reset:
Monitors pushbutton for external override
Controls external power switch for high-current applications
Controls low-power stop mode in battery operated hand-held applications
Watchdog timer
5V operation with active high and low resets:
±5% of 5V (DS1239-5)
±10% of 5V (DS1239-10)
Battery switch:
Converts CMOS SRAM into nonvolatile memory
Control pins gate to external power switch for high-current applications
CE control:
Unconditionally write-protects memory when power supply is out of tolerance
Consumes less than 100nA of battery current at 25°C
필요한 것을 찾지 못하셨나요?
Maxim 애플리케이션 엔지니어에게 문의하십시오. 부품을 찾는데 필요한 전문가의 도움이 보통 업무일 1일 이내에 제공됩니다.
부품번호 suffix: T 또는 T&R = 테잎 앤 릴,
+ = RoHS/lead-free,
# = RoHS/lead 예외.추가 정보: 전체 데이터 시트 또는 부품번호 규칙
*일부 패키지는 크기 편차(variation)를 가지며 이 값은 도면 상에 제시되어 있습니다. “패키지 코드/편차”는 해당 제품이 사용하고 있는 편차를 보여줍니다. 부품번호 suffix에 "+", "#", "-"는 RoHS 준수 상태를 나타냅니다. 패키지 도면에 suffix 문자는 다를 수 있습니다.
다운로드