ENGLISH 简体中文 日本語 한국어  

    로그인 | 회원가입 


   
 
키워드나 부품번호를 입력해주세요    



MAX9125, MAX9126
종단 기능이 내장된 4채널 LVDS 라인 드라이버


  QuickView     기술 자료     주문 정보     추가 정보     사용자 의견 (0)     전체  
상태
구매 가능: 생산 중

데이터 시트
전체 데이터 시트 (PDF, 232kB)
English Download this datasheet in PDF format다운로드

제품 설명
The MAX9125/MAX9126 quad low-voltage differential signaling (LVDS) line receivers are ideal for applications requiring high data rates, low power, and reduced noise. The MAX9125/MAX9126 are guaranteed to receive data at speeds up to 500Mbps (250MHz) over controlled-impedance media of approximately 100Ω. The transmission media may be printed circuit (PC) board traces or cables.

The MAX9125/MAX9126 accept four LVDS differential inputs and translate them to 3.3V CMOS outputs. The MAX9126 features integrated parallel termination resistors (nominally 115Ω), which eliminate the requirement for four discrete termination resistors and reduce stub length. The MAX9125 inputs are high impedance and require an external termination resistor when used in a point-to-point connection.

The devices support a wide common-mode input range of 0.05V to 2.35V, allowing for ground potential differences and common-mode noise between the driver and the receiver. A fail-safe feature sets the output high when the inputs are open, or when the inputs are undriven and shorted or parallel terminated. The EN and EN-bar inputs control the high-impedance output and are common to all four receivers. Inputs conform to the ANSI TIA/EIA-644 LVDS standard. The MAX9125/ MAX9126 operate from a single +3.3V supply, are specified for operation from -40°C to +85°C, and are available in 16-pin TSSOP and SO packages. Refer to the MAX9124 data sheet for a quad LVDS line driver.

주요기능
  • Integrated Termination Eliminates Four External Resistors (MAX9126)
  • Pin Compatible with DS90LV032A
  • Guaranteed 500Mbps Data Rate
  • 300ps Pulse Skew (max)
  • Conform to ANSI TIA/EIA-644 LVDS Standard
  • Single +3.3V Supply
  • Low 70µA Shutdown Supply current
  • Fail-Safe Circuit

Key Specifications:  High-Speed Interconnect (Differential Signaling)
Part Number Features Signal Type Signal Type Functions Rx Tx Data Rates
(Mbps)
tPD
(ps)
VSUPPLY
(V)
Price
Rx Tx max See Notes
MAX9125 
Fail-Safe Inputs
Flow-Through Pinout
LVDS
CMOS
LVTTL
Level Translator 4 4 500 3300 3.3 $1.99 @1k
MAX9126 
Fail-Safe Inputs
Flow-Through Pinout
Integrated Input Termination
$2.11 @5k
모두 보기High-Speed Interconnect (Differential Signaling) (132)

다이어그램
MAX9125, MAX9126: Typical Application Circuit
일반 애플리케이션 회로

애플리케이션 노트
  • 애플리케이션 노트 873: High-Speed Signal Distribution Using Low-Voltage Differential Signaling (LVDS) - MAX9125

    디자인 가이드
  • Fiber (PDF)

    신뢰성 보고서
  • FIT 데이터 보기:
  • 신뢰성 보고서 요청:

    소프트웨어/모델
  • MAX9125 IBIS 모델

    주문 정보
    참고:

    1. 부품을 구매하기 위한 기타 옵션 및 링크는 http://korea.maxim-ic.com/sales에 실려 있습니다.
    2. 필요한 것을 찾지 못하셨나요? Maxim 애플리케이션 엔지니어에게 문의하십시오. 부품을 찾는데 필요한 전문가의 도움이 보통 업무일 1일 이내에 제공됩니다.
    3. 부품번호 suffix: T 또는 T&R = 테잎 앤 릴, + = RoHS/lead-free, # = RoHS/lead 예외.추가 정보: 전체 데이터 시트 또는 부품번호 규칙
    4. *일부 패키지는 크기 편차(variation)를 가지며 이 값은 도면 상에 제시되어 있습니다. “패키지 코드/편차”는 해당 제품이 사용하고 있는 편차를 보여줍니다. 부품번호 suffix에 "+", "#", "-"는 RoHS 준수 상태를 나타냅니다. 패키지 도면에 suffix 문자는 다를 수 있습니다.


    소자: 1-8 / 8

    MAX9125 무료 샘플 구매 상태
    패키지: 타입 핀 풋프린트
      도면 코드/편차 *
    온도 RoHS/Lead-Free?
    재료 분석
    MAX9125ESE+  
    구매 가능 SOIC(N),16 핀,62 mm²
    도면: 21-0041 (PDF)
    랜드 패턴: 90-0097 (PDF)
    패키지 코드/편차 이용: S16+3*
    -40°C ~ +85°C RoHS/Lead-Free: Lead-Free
    재료 분석
    MAX9125ESE+T    
    구매 가능 SOIC(N),16 핀,62 mm²
    도면: 21-0041 (PDF)
    랜드 패턴: 90-0097 (PDF)
    패키지 코드/편차 이용: S16+3*
    -40°C ~ +85°C RoHS/Lead-Free: Lead-Free
    재료 분석
    MAX9125ESE    
    구매 가능 SOIC(N),16 핀,62 mm²
    도면: 21-0041 (PDF)
    랜드 패턴: 90-0097 (PDF)
    패키지 코드/편차 이용: S16-3*
    -40°C ~ +85°C RoHS/Lead-Free: 아니오
    재료 분석
    MAX9125ESE-T    
    구매 가능

    랜드 패턴: 없음

    -40°C ~ +85°C 데이터 시트 보기
    MAX9126 무료 샘플 구매 상태
    패키지: 타입 핀 풋프린트
      도면 코드/편차 *
    온도 RoHS/Lead-Free?
    재료 분석
    MAX9126ESE+    
    구매 가능 SOIC(N),16 핀,62 mm²
    도면: 21-0041 (PDF)
    랜드 패턴: 90-0097 (PDF)
    패키지 코드/편차 이용: S16+3*
    -40°C ~ +85°C RoHS/Lead-Free: Lead-Free
    재료 분석
    MAX9126ESE+T    
    구매 가능

    랜드 패턴: 없음

    -40°C ~ +85°C 데이터 시트 보기
    MAX9126EUE+    
    구매 가능 TSSOP,16 핀,33 mm²
    도면: 21-0066 (PDF)
    랜드 패턴: 90-0117 (PDF)
    패키지 코드/편차 이용: U16+2*
    -40°C ~ +85°C RoHS/Lead-Free: Lead-Free
    재료 분석
    MAX9126EUE+T    
    구매 가능

    랜드 패턴: 없음

    -40°C ~ +85°C 데이터 시트 보기

    추가 정보
  • 신제품 보도자료: 2001-06-01 

    필요한 것을 찾지 못하셨나요?
  • 익일에 제공되는 애플리케이션 엔지니어의 제품 선택 조언
  • 파라메트릭 검색
  • 애플리케이션 도움말
  •  QuickView   기술 자료   주문 정보   추가 정보  
     제품 설명 
     주요기능 
     애플리케이션/용도 
     주요 사양 
     다이어그램 

     데이터 시트 
     애플리케이션 노트 
     디자인 가이드 
     Engineering Journal 
     신뢰성 보고서 
     소프트웨어/모델 
     EV 킷 

     가격 및 재고 유모 
     샘플 
     온라인 구매 
     패키지 정보 
     Lead-Free 정보 

     관련된 제품군 
     참고 사항 
     EV 킷 

    문서 레퍼런스 19-1908; 개정판 0; 2001-06-18
    이 페이지는 최근에 변경됨: 2007-06-15


            •         •         •     개인정보보호 정책     •     법적 고지

        Copyright © 2009 by Maxim Integrated Products