ENGLISH 简体中文 日本語 한국어  

    로그인 | 회원가입 


   
 
키워드나 부품번호를 입력해주세요    



MAX4711, MAX4712, MAX4713
오류 보호, 저전압, 쿼드 SPST 아날로그 스위치

쿼드, Rail-to-Rail, 오류 방지, 저전압 SPST 아날로그 스위치


  QuickView     기술 자료     주문 정보     추가 정보     사용자 의견 (0)     전체  
제품 설명
전체 데이터 시트 (PDF, 904kB)
English Download this datasheet in PDF format다운로드
The MAX4711/MAX4712/MAX4713 are fault-protected, Rail-to-Rail, low-voltage analog switches featuring low on-resistance and guaranteed on-resistance flatness over the specified signal range. Due to the fault protection feature the analog switch input (NO_ or NC_) and output (COM_) pins are not symmetrical. The fault protection feature allows for the analog input to go beyond the plus or minus supplies without the device drawing excessive amounts of current from the analog inputs. When the analog inputs are driven beyond the supply rails when the switch is on, it will sense a fault and turn itself off and the analog switch output will be clamped to the same polarity supply as the input signal and will not go beyond the supply rails. This feature protects any electronic circuitry connected to the output from excessive voltages present on the analog inputs.

The MAX4711/MAX4712/MAX4713 are quad, singlepole/single-throw (SPST) analog switches. The MAX4711 has four normally closed switches (NC), the MAX4712 has four normally open switches (NO), and the MAX4713 has two NO and two NC switches. Switching times are less than 125ns for tON, and less than 80ns for tOFF. These switches operate from a single +2.7V to +11V supply or from dual ±2.7V to ±5.5V supplies. All digital inputs have +0.8V to +2.4V logic thresholds, ensuring both TTL and CMOS logic compatibility when using ±4.5V to ±5.5V or single +4.5V to +11V supplies.

주요기능   애플리케이션/용도
  • Fault-Protected Analog Inputs
  • ±12V Fault Protection with Power Off
  • ±7V Fault Protection with ±5V Supplies
  • +12V and -7V Fault Protection with +5V Supply
  • +12V and -9V Fault Protection with +3V Supply
  • Fault-Protected Digital Inputs May Exceed V+ Supply Rail
  • All Switches Off with Power Off
  • Rail-to-Rail Signal Handling
  • Output Clamped to Appropriate Supply Voltages During Fault Condition
  • 25Ω (max) RON at +25°C
  • 1Ω (max) On-Resistance Match Between Channels
  • Single- and Dual-Supply Operation
  • Pin-Compatible with Industry-Standard MAX391/MAX392/MAX393
  • TTL- and CMOS-Compatible Logic Inputs

 
  • 항공
  • 배터리로 동작하는 시스템
  • 통신 시스템
  • 데이터 수집
  • 산업용 및 프로세스 제어 시스템
  • 리던던시/백업 시스템
  • 신호 라우팅
  • 시험 장비

    Key Specifications:   Switches and Multiplexers (Mid Voltage)
    Part Number Configuration Number of Channels Normally (Open/Closed) VSUPPLY, Single (min) (V) VSUPPLY, Single (max) (V) VSUPPLY, Dual (min) (±V) VSUPPLY, Dual (max) (±V) RON (max) (Ω) IL (OFF) (max) (nA) tON (max) (nS) tOFF (max) (nS) QINJECTION (pC) CON (pF) COFF (pF) Price**
    MAX4711  SPST 4 Closed 2.7 11 2.7 5.5 25 0.5 125 80 25 30 8 $2.05 @ 1k
    MAX4712  Open 26 $2.05 @ 1k
    MAX4713  Open/Closed 27 $2.26 @ 1k
    See All Switches and Multiplexers (Mid Voltage) (297)
    Notes:
    **This pricing is BUDGETARY, for comparing similar parts. Prices are in U.S. dollars and subject to change. Quantity pricing may vary substantially and international prices may differ due to local duties, taxes, fees, and exchange rates. For volume-specific prices and delivery, please see the price and availability page or contact an authorized distributor.

    필요한 것을 찾지 못하셨나요?
  • 익일에 제공되는 애플리케이션 엔지니어의 제품 선택 조언
  • 파라메트릭 검색
  • 애플리케이션 도움말
  •  QuickView   기술 자료   주문 정보   추가 정보  
     제품 설명 
     주요기능 
     애플리케이션/용도 
     주요 사양 
     다이어그램 

     데이터 시트 
     애플리케이션 노트 
     디자인 가이드 
     Engineering Journal 
     신뢰성 보고서 
     소프트웨어/모델 
     EV 킷 

     가격 및 재고 유모 
     샘플 
     온라인 구매 
     패키지 정보 
     Lead-Free 정보 

     관련된 제품군 
     참고 사항 
     EV 킷 

    문서 레퍼런스 19-1907; 개정판 1; 2004-04-01
    이 페이지는 최근에 변경됨: 2007-06-14


            •         •         •     개인정보보호 정책     •     법적 고지

        Copyright © 2009 by Maxim Integrated Products