ENGLISH 简体中文 日本語 한국어  

MAX5441, MAX5442, MAX5443, MAX5444
+3V/+5V, 직렬 입력, 전압 출력, 16비트 DAC


  QuickView     기술 자료     주문 정보     추가 정보     사용자 의견 (0)     전체  
제품 설명
전체 데이터 시트 (PDF, 224kB)
English Download this datasheet in PDF format다운로드

The MAX5441-MAX5444 are serial-input, voltage-output, 16-bit digital-to-analog converters (DACs) in tiny µMAX® packages, 50% smaller than comparable DACs in 8-pin SOs. They operate from low +3V (MAX5443/MAX5444) or +5V (MAX5441/MAX5442) single supplies. They provide 16-bit performance (±2LSB INL and ±1LSB DNL) over temperature without any adjustments. Unbuffered DAC outputs result in a low supply current of 120µA and a low offset error of 2LSB.

The DAC output ranges from 0 to VREF. For bipolar operation, matched scaling resistors are provided in the MAX5442/MAX5444 for use with an external precision op amp (such as the MAX400), generating a ±VREF output swing. A 16-bit serial word is used to load data into the DAC latch. The 25MHz, 3-wire serial interface is compatible with SPI™/QSPI™/MICROWIRE™, and can interface directly with optocouplers for applications requiring isolation. A power-on reset circuit clears the DAC output to code 0 (MAX5441/MAX5443) or code 32768 (MAX5442/MAX5444) when power is initially applied. A logic low on active-low CLR asynchronously clears the DAC output to code 0 (MAX5441/MAX5443) or code 32768 (MAX5442/MAX5444) independent of the serial interface. The MAX5441/MAX5443 are available in 8-pin µMAX packages. The MAX5442/MAX5444 are available in 10-pin µMAX packages.

주요기능   애플리케이션/용도
  • Ultra-Small 3mm x 5mm 8-Pin µMAX Package
  • Low 120µA Supply Current
  • Fast 1µs Settling Time
  • 25MHz SPI/QSPI/MICROWIRE-Compatible Serial Interface
  • VREF Range Extends to VDD
  • +5V (MAX5441/MAX5442) or +3V (MAX5443/MAX5444) Single-Supply Operation
  • Full 16-Bit Performance Without Adjustments
  • Unbuffered Voltage Output Directly Drives 60kΩ Loads
  • Power-On Reset Circuit Clears DAC Output to Code 0 (MAX5441/MAX5443) or Code 32768 (MAX5442/MAX5444)
  • Schmitt-Trigger Inputs for Direct Optocoupler Interface
  • Asynchronous Active-Low CLR

 
  • 자동 시험 장비 (ATE)
  • 데이터 수집
  • 고해상도 오프셋 및 이득 조정
  • 산업용 프로세스 제어

    Key Specifications:   Digital-to-Analog Converters
    Part Number Number of Bits Number of Channels Interface Compatibility Typ. Settling Time (µs) Output Type Buffered Non-volatile (NV) Min. Single Supply (V) Max. Single Supply (V) RoHS Available Package Operating Temp. Range (°C) Price**
    MAX5441  16 1 Serial - SPI 1 Voltage No No 4.5 5.5 Yes uMAX/8 -40 to +85
    0 to +70
    $9.95 @ 1k
    MAX5442  4.5 5.5 uMAX/10 $9.95 @ 1k
    MAX5443  2.7 3.6 uMAX/8 $9.95 @ 1k
    MAX5444  2.7 3.6 uMAX/10 $9.95 @ 1k
    See All Digital-to-Analog Converters (250)
    Notes:
    **This pricing is BUDGETARY, for comparing similar parts. Prices are in U.S. dollars and subject to change. Quantity pricing may vary substantially and international prices may differ due to local duties, taxes, fees, and exchange rates. For volume-specific prices and delivery, please see the price and availability page or contact an authorized distributor.

    다이어그램
    MAX5441, MAX5442, MAX5443, MAX5444: Functional Block Diagrams
    기능 블록 다이어그램

    필요한 것을 찾지 못하셨나요?
  • 익일에 제공되는 애플리케이션 엔지니어의 제품 선택 조언
  • 파라메트릭 검색
  • 애플리케이션 도움말
  •  QuickView   기술 자료   주문 정보   추가 정보  
     제품 설명 
     주요기능 
     애플리케이션/용도 
     주요 사양 
     다이어그램 

     데이터 시트 
     애플리케이션 노트 
     디자인 가이드 
     Engineering Journal 
     신뢰성 보고서 
     소프트웨어/모델 
     EV 킷 

     가격 및 재고 유모 
     샘플 
     온라인 구매 
     패키지 정보 
     Lead-Free 정보 

     관련된 제품군 
     참고 사항 
     EV 킷 

    문서 레퍼런스 19-1846; 개정판 2; 2008-04-17
    이 페이지는 최근에 변경됨: 2008-09-01



          개인정보보호 정책    법적 고지

          Copyright © 2008 by Maxim Integrated Products, Dallas Semiconductor