The MAX3080E–MAX3089E are ±15kV electrostatic discharge
(ESD)-protected, high-speed transceivers for RS-485/RS-422 communication that contain one driver and one receiver. These devices feature fail-safe circuitry,
which guarantees a logic-high receiver output when the
receiver inputs are open or shorted. This means that the
receiver output will be a logic high if all transmitters on a
terminated bus are disabled (high impedance). The
MAX3080E/MAX3081E/MAX3082E feature reduced
slew-rate drivers that minimize EMI and reduce reflections
caused by improperly terminated cables, allowing
error-free data transmission up to 115kbps. The
MAX3083E/MAX3084E/MAX3085E offer higher driver
output slew-rate limits, allowing transmit speeds up to
500kbps. The MAX3086E/MAX3087E/MAX3088Es' driver
slew rates are not limited, making transmit speeds
up to 10Mbps possible. The MAX3089E's slew rate is
selectable between 115kbps, 500kbps, and 10Mbps by
driving a selector pin with a single three-state driver. All
devices feature enhanced ESD protection. All transmitter
outputs and receiver inputs are protected to ±15kV
using the Human Body Model.
These transceivers typically draw 375µA of supply
current when unloaded, or when fully loaded with the drivers
disabled.
All devices have a 1/8-unit-load receiver input impedance
that allows up to 256 transceivers on the bus. The
MAX3082E/MAX3085E/MAX3088E are intended for halfduplex
communications, while the MAX3080E/MAX3081E/MAX3083E/MAX3084E/MAX3086E/MAX3087E are intended for full-duplex communications. The MAX3089E
is selectable between half-duplex and full-duplex operation.
It also features independently programmable
receiver and transmitter output phase via separate pins.
주요기능
애플리케이션/용도
ESD Protection for RS-485 I/O Pins
±15kV, Human Body Model
True Fail-Safe Receiver While Maintaining EIA/TIA-485 Compatibility
Enhanced Slew-Rate Limiting Facilitates Error-Free Data Transmission (MAX3080E-MAX3085E/MAX3089E)
다운로드
