ENGLISH 简体中文 日本語 한국어  

    로그인 | 회원가입 


   
 
키워드나 부품번호를 입력해주세요    



MAX5264
ATE용 병렬 인터페이스가 내장된 8채널, 14비트 전압 출력 DAC


  QuickView     기술 자료     주문 정보     추가 정보     사용자 의견 (0)     전체  
상태
구매 가능: 생산 중

제품 설명
전체 데이터 시트 (PDF, 464kB)
English Download this datasheet in PDF format다운로드
The MAX5264 contains eight 14-bit, voltage-output digital-to-analog converters (DACs). On-chip precision output amplifiers provide the voltage outputs. The device operates from +14V/-9V supplies. Its bipolar output voltage swing ranges from +9V to -4V and is achieved with no external components. The MAX5264 has three pairs of differential reference inputs; two of these pairs are connected to two DACs each, and a third pair is connected to four DACs. The references are independently controlled, providing different full-scale output voltages to the respective DACs. The MAX5264 operates within the following voltage ranges: VDD = +7V to +14V, VSS = -5V to -9V, and VCC = +4.75V to +5.25V.

The MAX5264 features double-buffered interface logic with a 14-bit parallel data bus. Each DAC has an input latch and a DAC latch. Data in the DAC latch sets the output voltage. The eight input latches are addressed with three address lines. Data is loaded to the input latch with a single write instruction. An asynchronous load input (active-low LD) transfers data from the input latch to the DAC latch. The active-low LD input controls all DACs; therefore, all DACs can be updated simultaneously by asserting the active-low LD pin. An asynchronous active-low CLR input sets the output of all eight DACs to the respective DUTGND input of the op amp. Note that active-low CLR is a CMOS input, which is powered by VDD. All other logic inputs are TTL/CMOS compatible. The "A" grade of the MAX5264 has a maximum INL of ±4LSBs, while the "B" grade has a maximum INL of ±8LSBs. Both grades are available in 44-pin MQFP packages.

주요기능   애플리케이션/용도
  • Full 14-Bit Performance Without Adjustments
  • 8 DACs in a Single Package
  • Buffered Voltage Outputs
  • Unipolar or Bipolar Voltage Swing to +9V and -4V
  • 22µs Output Settling Time
  • Drives Up to 10,000pF Capacitive Load
  • Low Output Glitch: 30mV
  • Low Power Consumption: 10mA (typ)
  • Small 44-Pin MQFP Package
  • Double-Buffered Digital Inputs
  • Asynchronous Load Updates All DACs Simultaneously
  • Asynchronous CLR-bar Forces All DACs to DUTGND Potential

 

Key Specifications:  Precision DACs (12-16 Bits)
Part Number Resolution Bits Channels Output Type Reference INL
(±LSB)
Interface Supply Range
(V)
Supply Range
(V)
Oper. Temp.
(°C)
Price
max min max See Notes
MAX5264A  14 8 Voltage- Buffered Ext. 4 Parallel - Full Word 9 14 0 to +70 -
MAX5264B  8 -
모두 보기Precision DACs (12-16 Bits) (235)

다이어그램
MAX5264: Functional Block Diagram
기능 블록 다이어그램

필요한 것을 찾지 못하셨나요?
  • 익일에 제공되는 애플리케이션 엔지니어의 제품 선택 조언
  • 파라메트릭 검색
  • 애플리케이션 도움말
  •  QuickView   기술 자료   주문 정보   추가 정보  
     제품 설명 
     주요기능 
     애플리케이션/용도 
     주요 사양 
     다이어그램 

     데이터 시트 
     애플리케이션 노트 
     디자인 가이드 
     Engineering Journal 
     신뢰성 보고서 
     소프트웨어/모델 
     EV 킷 

     가격 및 재고 유모 
     샘플 
     온라인 구매 
     패키지 정보 
     Lead-Free 정보 

     관련된 제품군 
     참고 사항 
     EV 킷 

    문서 레퍼런스 19-1734; 개정판 0; 2000-08-10
    이 페이지는 최근에 변경됨: 2008-09-05


            •         •         •     개인정보보호 정책     •     법적 고지

        Copyright © 2009 by Maxim Integrated Products