ENGLISH 简体中文 日本語 한국어  

    로그인 | 회원가입 


   
 
키워드나 부품번호를 입력해주세요    



MAX5264
ATE용 병렬 인터페이스가 내장된 8채널, 14비트 전압 출력 DAC


  QuickView     기술 자료     주문 정보     추가 정보     사용자 의견 (0)     전체  
제품 설명
전체 데이터 시트 (PDF, 464kB)
English Download this datasheet in PDF format다운로드
The MAX5264 contains eight 14-bit, voltage-output digital-to-analog converters (DACs). On-chip precision output amplifiers provide the voltage outputs. The device operates from +14V/-9V supplies. Its bipolar output voltage swing ranges from +9V to -4V and is achieved with no external components. The MAX5264 has three pairs of differential reference inputs; two of these pairs are connected to two DACs each, and a third pair is connected to four DACs. The references are independently controlled, providing different full-scale output voltages to the respective DACs. The MAX5264 operates within the following voltage ranges: VDD = +7V to +14V, VSS = -5V to -9V, and VCC = +4.75V to +5.25V.

The MAX5264 features double-buffered interface logic with a 14-bit parallel data bus. Each DAC has an input latch and a DAC latch. Data in the DAC latch sets the output voltage. The eight input latches are addressed with three address lines. Data is loaded to the input latch with a single write instruction. An asynchronous load input (active-low LD) transfers data from the input latch to the DAC latch. The active-low LD input controls all DACs; therefore, all DACs can be updated simultaneously by asserting the active-low LD pin. An asynchronous active-low CLR input sets the output of all eight DACs to the respective DUTGND input of the op amp. Note that active-low CLR is a CMOS input, which is powered by VDD. All other logic inputs are TTL/CMOS compatible. The "A" grade of the MAX5264 has a maximum INL of ±4LSBs, while the "B" grade has a maximum INL of ±8LSBs. Both grades are available in 44-pin MQFP packages.

주요기능   애플리케이션/용도
  • Full 14-Bit Performance Without Adjustments
  • 8 DACs in a Single Package
  • Buffered Voltage Outputs
  • Unipolar or Bipolar Voltage Swing to +9V and -4V
  • 22µs Output Settling Time
  • Drives Up to 10,000pF Capacitive Load
  • Low Output Glitch: 30mV
  • Low Power Consumption: 10mA (typ)
  • Small 44-Pin MQFP Package
  • Double-Buffered Digital Inputs
  • Asynchronous Load Updates All DACs Simultaneously
  • Asynchronous CLR-bar Forces All DACs to DUTGND Potential

 
  • 임의 함수 발생기
  • 자동 시험 장비 (ATE)
  • 항공 및 군용 시스템
  • 디지털 이득 및 오프셋 제어
  • 산업용 프로세스 제어
  • 최소 부품수 아날로그 시스템
  • SONET 애플리케이션

    Key Specifications:   Precision DACs (12-16 Bits)
    Part Number Number of Bits Number of Channels Output Type Reference Max. INL (±LSB) Interface Min. Single Supply (V) Max. Single Supply (V) Operating Temp. Range (°C)
    MAX5264A  14 8 Voltage- Buffered Ext. 4 Parallel - Full Word 9 14 0 to +70
    MAX5264B  8
    See All Precision DACs (12-16 Bits) (235)

    다이어그램
    MAX5264: Functional Block Diagram
    기능 블록 다이어그램

    필요한 것을 찾지 못하셨나요?
  • 익일에 제공되는 애플리케이션 엔지니어의 제품 선택 조언
  • 파라메트릭 검색
  • 애플리케이션 도움말
  •  QuickView   기술 자료   주문 정보   추가 정보  
     제품 설명 
     주요기능 
     애플리케이션/용도 
     주요 사양 
     다이어그램 

     데이터 시트 
     애플리케이션 노트 
     디자인 가이드 
     Engineering Journal 
     신뢰성 보고서 
     소프트웨어/모델 
     EV 킷 

     가격 및 재고 유모 
     샘플 
     온라인 구매 
     패키지 정보 
     Lead-Free 정보 

     관련된 제품군 
     참고 사항 
     EV 킷 

    문서 레퍼런스 19-1734; 개정판 0; 2000-08-10
    이 페이지는 최근에 변경됨: 2008-09-05


            •         •         •     개인정보보호 정책     •     법적 고지

        Copyright © 2009 by Maxim Integrated Products