The MAX6365–MAX6368 supervisory circuits simplify power-supply monitoring, battery-backup control functions, and memory write protection in microprocessor (µP) systems. The circuits significantly improve the size, accuracy, and reliability of modern systems with an ultra-small integrated solution.
These devices perform four basic system functions:
Provide a µP reset output during VCC supply power-up, power-down, and brownout conditions.
Internally control VCC to backup-battery switching to maintain data or low-power operation for CMOS RAM, CMOS µPs, real-time clocks, and other digital logic when the main supply fails.
Provide memory write protection through internal chip-enable gating during supply or processor faults.
Include one of the following options: a manual reset input (MAX6365), a watchdog timer function (MAX6366), a battery-on output (MAX6367), or an auxiliary user-adjustable reset input (MAX6368).
The MAX6365–MAX6368 operate from VCC supply voltages as low as 1.2V. The factory preset reset threshold voltages range from 2.32V to 4.63V (see Ordering Information). In addition, each part is offered in three reset output versions: push-pull active low, open-drain active low, or open-drain active high (see Selector Guide). The MAX6365–MAX6368 are available in miniature 8-pin SOT23 packages.
주요기능
애플리케이션/용도
Low +1.2V Operating Supply Voltage (VCC or VBATT)
Precision Monitoring of +5.0, +3.3V, +3.0V, and
+2.5V Power-Supply Voltages
On-Board Gating of Chip-Enable Signals, 1.5ns Propagation Delay
Debounced Manual Reset Input (MAX6365)
Watchdog Timer, 1.6s Timeout (MAX6366)
Battery-On Output Indicator (MAX6367)
Auxiliary User-Adjustable RESET IN (MAX6368)
Low 10µA Quiescent Supply Current
Three Available Output Structures
Push-Pull active-low RESET
Open-Drain active-low RESET
Open-Drain RESET
RESET/active-low RESET Valid Down to 1.2V Guaranteed
다운로드
