ENGLISH 简体中文 日本語 한국어  

MAX4271, MAX4272, MAX4273
자동재시도, DualSpeed/BiLevel 오류 보호 기능이 있는 3V ~ 12V, 전류 제한, 핫 스왑 컨트롤러

8-SO 패키지로 제공되며 래치 보호 또는 자동 재시도 기능이 있는 3V ~ 12V 핫 스왑 컨트롤러


  QuickView     기술 자료     주문 정보     추가 정보     전체  
제품 설명
전체 데이터 시트 (PDF, 416kB)
English Download this datasheet in PDF format다운로드

The MAX4271/MAX4272/MAX4273 comprise a complete family of integrated 3V to 12V hot-swap controllers. They allow the safe insertion and removal of circuit cards into live backplanes.

The discharged filter capacitors of the circuit card provide a low impedance to the live backplane. High in-rush currents from the backplane to the circuit card can burn up connectors and components, or momentarily collapse the backplane power supply leading to a system reset. This family of hot-swap controllers prevents such problems by regulating the current to a preset limit when the board is plugged in, allowing the system to stabilize safely. After the startup cycle is completed, two on-chip comparators provide DualSpeed/BiLevel™ protection against short circuits, load glitches, and overcurrent conditions. In the event of a fault condition, the load is disconnected. Fault recovery is handled by unlatching (MAX4271), autoretry (MAX4272), or programmed (MAX4273) methods.

The MAX4271 family includes many integrated features that reduce component count and design time. An on-board charge pump provides the gate drive for a low-cost, external n-FET. Integrated features like startup current regulation and current glitch protection eliminate external timing resistors and capacitors. Also featured are an open-drain status output to indicate a fault condition, and an adjustable overcurrent response time.

The MAX4271 (latched fault protection) and MAX4272 (autoretry fault protection) come in 8-pin SO packages. The MAX4273 (full function) comes in the space-saving 16-pin QSOP package and 16-pin SO package. All parts are specified across the extended temperature range, and have an absolute maximum rating of 15V to provide extra protection against inductive kickback during board removal.

주요기능   애플리케이션/용도
  • Provide Safe Hot Swap for +3V to +12V Power Supplies with Few External Components
  • Unique Current Regulation Architecture Minimizes n-FET Linear Mode Duration
  • Autoretry Feature (MAX4272/MAX4273)
  • DualSpeed/BiLevel Current Limit Protects Against Current Glitches and Short Circuits
  • Power-On RESET (MAX4273)
  • 15V Absolute Maximum Rating Protects Against Inductive Kickbacks During Board Removal
  • Internal Charge Pump Generates Gate Drive for External n-MOSFET
  • Status Output Pin Indicates Fault/Safe Condition
  • Space-Saving 8-Pin SO, 16-Pin QSOP Packages

 
  • PBX
  • RAID
  • 라우터/스위치
  • 라우터/스위치
  • 텔레콤
  • 무선 기지국

    Key Specifications:   Hot Swap Controllers
    Part Number Min. VIN (V) Max. VIN (V) Low Voltage High Voltage Voltage Polarity Type Fault Condition Control Number of Channels Features RoHS Available Package Smallest Available Package (max w/pins) (mm2) Operating Temp. Range (°C) Price**
    MAX4271  2.7 13.2 Yes No Positive Positive, Low-Voltage Latched Off 1
    On/Off and STAT Control
    Regulated, DualSpeed/BiLevel; inrush current and short circuit protection
    Yes SOIC/8 31 -40 to +85 $1.95 @ 1k
    MAX4272  Periodic retry
    On/Off and STAT Control
    Regulated, DualSpeed/BiLevel; inrush current and short circuit protection
    SOIC/8 $2.04 @ 1k
    MAX4273  Programmable latched off or periodic retry
    On/Off, STAT, and POR Controls
    Regulated, DualSpeed/BiLevel; inrush current and short circuit protection
    QSOP/16
    SOIC/16
    $2.28 @ 1k
    See All Hot Swap Controllers (44)
    Notes:
    **This pricing is BUDGETARY, for comparing similar parts. Prices are in U.S. dollars and subject to change. Quantity pricing may vary substantially and international prices may differ due to local duties, taxes, fees, and exchange rates. For volume-specific prices and delivery, please see the price and availability page or contact an authorized distributor.

    다이어그램
    MAX4271, MAX4272, MAX4273: Typical Operating Circuit
    일반 동작 회로

    필요한 것을 찾지 못하셨나요?
  • 익일에 제공되는 애플리케이션 엔지니어의 제품 선택 조언
  • 파라메트릭 검색
  • 애플리케이션 도움말
  •  QuickView   기술 자료   주문 정보   추가 정보  
     제품 설명 
     주요기능 
     애플리케이션/용도 
     주요 사양 
     다이어그램 

     데이터 시트 
     애플리케이션 노트 
     디자인 가이드 
     Engineering Journal 
     신뢰성 보고서 
     소프트웨어/모델 
     EV 킷 

     가격 및 재고 유모 
     샘플 
     온라인 구매 
     패키지 정보 
     Lead-Free 정보 

     관련된 제품군 
     참고 사항 
     EV 킷 

    문서 레퍼런스 19-1694; 개정판 2; 2007-12-20
    이 페이지는 최근에 변경됨: 2007-12-20



          개인정보보호 정책    법적 고지

          Copyright © 2008 by Maxim Integrated Products, Dallas Semiconductor


    ">