The MAX4444/MAX4445 differential line receivers offer unparalleled high-speed, low-distortion performance. Using a three op amp instrumentation amplifier architecture, these ICs have symmetrical differential inputs and a single-ended output. They operate from ±5V
supplies and are capable of driving a 100Ω load to ±3.7V. The MAX4444 has an internally set closed-loop gain of +2V/V, while the MAX4445 is compensated for gains of +2V/V or greater, set by an external resistor. A low-power enable mode reduces current consumption to 3.5mA.
Using current-feedback techniques, the MAX4444/MAX4445 achieve a 550MHz bandwidth while maintaining up to a 5000V/µs slew rate. Excellent differential gain/phase and noise specifications make these amplifiers ideal for a wide variety of video and RF signal-processing applications. An evaluation kit is available to speed design.
주요기능
애플리케이션/용도
5000V/µs Slew Rate (MAX4444)
+2V/V Internally Fixed Gain (MAX4444)
External Gain Selection (MAX4445, AVCL> +2V/V)
550MHz -3dB Bandwidth
-60dB SFDR at 5MHz
Low Differential Gain/Phase: 0.07%/0.05°
Low Noise: 25nV/ at fIN = 100kHz
Low-Power Disable Mode Reduces Quiescent Current to 3.5mA
데이터 수집
차동-단일 종단 변환
고속 차동 라인 수신기
고속 계기 증폭기
의료 계측
트위스트 페어-동축 컨버터
Key Specifications:
Video/Wideband Line Drivers/Receivers
Notes: **This pricing is BUDGETARY, for comparing similar parts. Prices are in
U.S. dollars and subject to change. Quantity pricing may vary
substantially and international prices may differ due to local
duties, taxes, fees, and exchange rates. For volume-specific prices
and delivery, please see the price and availability page
or contact an authorized distributor.
다운로드
at fIN = 100kHz
