The MAX3471 half-duplex transceiver is intended for lithium battery-powered RS-485/RS-422 applications. It draws only 1.6µA (typical) supply current from a 3.6V supply with the receiver enabled and the driver disabled. Its wide 2.5V to 5.5V supply voltage guarantees operation over the lifetime of a lithium battery.
This device features true fail-safe operation that guarantees a logic-high receiver output when the receiver inputs are open or shorted. This means that the receiver output will be a logic high if all transmitters on a terminated bus are disabled (high impedance). The MAX3471 has a 1/8-unit load input resistance. When driver outputs are enabled and pulled above VCC or below GND, internal circuitry prevents battery back-charging.
The MAX3471 is available in an 8-pin µMAX package.
주요기능
애플리케이션/용도
1.6µA Supply Current with Receiver Enabled
+2.5V to +5.5V Single-Supply Operation
True Fail-Safe Receiver Input
Available in µMAX Package
1/8-Unit-Load Receiver Input
-7V to +10V Common-Mode Input Voltage Range
배터리 전원 차동 통신
레벨 변환기
원격 계기 판독
Key Specifications: RS-422/485 Line Driver/Receivers
다운로드
