|
전체 데이터 시트
(PDF, 208kB)
|
English  다운로드
|
|
|
|
The MAX1660 digitally controlled fuel-gauge interface executes two essential functions for rechargeable battery-pack management: fuel gauging and pack overcurrent protection. It accurately monitors a battery pack's charge and discharge current flow, and records each using two independent, on-board Coulomb counters. Each counter's contents are externally accessible via a System
Management Bus (SMBus™)-compatible 2-wire serial interface. An optional third wire interrupts the microcontroller (°C) when the charge or discharge counters reach a preset value, or when an overcurrent condition (charge or discharge) occurs. In the event of an overcurrent or short-circuit condition, the MAX1660 disconnects the load and alerts its host. The MAX1660's
flexibility allows accurate fuel gauging for any battery chemistry, using any desired control algorithm.
The MAX1660 operates with battery voltages from +4V to +28V and provides two micropower shutdown modes, increasing battery lifetime. To minimize total parts count, the device integrates a precision 2.00V system-reference output, a 3.3V linear-regulator output that can supply up to 5mA to power external circuitry, and a power-on reset output for the system µC. The MAX1660 is available in a 16-pin QSOP package.
|
