ENGLISH 简体中文 日本語 한국어  

    로그인 | 회원가입 


   
 
키워드나 부품번호를 입력해주세요    



MAX1481, MAX1484, MAX1485, MAX1486
µMAX 패키지로 제공되는 소프트웨어 선택 가능, 하프/풀 듀플렉스, 슬루율 제한, 12Mbps, RS-485/RS-422 트랜시버


  QuickView     기술 자료     주문 정보     추가 정보     사용자 의견 (0)     전체  
제품 설명
전체 데이터 시트 (PDF, 392kB)
English Download this datasheet in PDF format다운로드
The MAX1481/MAX1484/MAX1485/MAX1486 provide software-selectable, half-/full-duplex, low-power, slew-rate- limited, and high-speed (12Mbps) RS-485/RS-422 operation in a 10-pin µMAX® package—the smallest 10-pin package available.

The software-selectable, half-/full-duplex MAX1485/MAX1486 make obsolete the normally larger and more expensive solutions required for selectable half-/full-duplex RS-485/RS-422 operation: 1) a 14-pin, full-duplex transceiver configured via jumpers between receiver and transmitter lines, or 2) two 8-pin, half-duplex transceivers, which require an additional inverter logic gate for software selectability.

The MAX1481/MAX1484 are functionally equivalent to the industry-standard MAX491 and 75180, and are designed for space-constrained, full-duplex RS-422 applications.

All parts contain one driver and one receiver and feature a 1/8-unit-load receiver input impedance, allowing up to 256 transceivers on the bus. The MAX1481/MAX1485 feature reduced-slew-rate drivers that minimize EMI and reduce reflections caused by improperly terminated cables, allowing error-free data transmission up to 250kbps. The MAX1484/MAX1486 driver slew rates are not limited, allowing them to transmit up to 12Mbps.

The MAX1481/MAX1484/MAX1485/MAX1486 draw only 300µA of supply current. The MAX1481 has a low-power shutdown mode that reduces supply current to only 0.1µA. All devices operate from a single 5V supply.

Drivers are output short-circuit current limited and are protected against excessive power dissipation by thermal-shutdown circuitry that places the driver outputs into a high-impedance state. The receiver input has a fail-safe feature that guarantees a logic-high output if the input is open circuit.

주요기능   애플리케이션/용도
  • 10-Pin µMAX Package: Smallest 10-Pin Package
  • Software-Selectable Half-/Full-Duplex Operation (MAX1485/MAX1486)
  • 0.1µA Low-Current Shutdown Mode (MAX1481)
  • Slew-Rate Limiting Allows Error-Free Data Transmission (MAX1481/MAX1485)
  • 12Mbps High-Speed Operation (MAX1484/MAX1486)
  • Allow up to 256 Transceivers on the Bus

 
  • 배터리 전원 애플리케이션
  • 핸드헬드 장치
  • 산업용 제어 LAN
  • 레벨 변환기
  • 저전력 RS-422/RS-485 통신
  • EMI에 민감한 애플리케이션용 트랜시버

    Key Specifications:   RS-422/485 Line Driver/Receivers
    Part Number Number of Tx/Rx Duplex Supply Voltage (V) Typ. ICC (mA) Data Rate (kbps) Tx EN Rx EN Typ. Shutdown ICC (µA) Number of Rx/Tx on Bus Package Price**
    MAX1481  1Tx + 1Rx Full 5 0.3 250 Yes Yes 0.1 256 µMAX/10 $1.15 @ 1k
    MAX1484  Full 12,000 Yes  -  $1.15 @ 1k
    MAX1485  Half/Full 250 No  -  $1.15 @ 1k
    MAX1486  Half/Full 12,000 No  -  $1.15 @ 1k
    See All RS-422/485 Line Driver/Receivers (159)
    Notes:
    **This pricing is BUDGETARY, for comparing similar parts. Prices are in U.S. dollars and subject to change. Quantity pricing may vary substantially and international prices may differ due to local duties, taxes, fees, and exchange rates. For volume-specific prices and delivery, please see the price and availability page or contact an authorized distributor.

    필요한 것을 찾지 못하셨나요?
  • 익일에 제공되는 애플리케이션 엔지니어의 제품 선택 조언
  • 파라메트릭 검색
  • 애플리케이션 도움말
  •  QuickView   기술 자료   주문 정보   추가 정보  
     제품 설명 
     주요기능 
     애플리케이션/용도 
     주요 사양 
     다이어그램 

     데이터 시트 
     애플리케이션 노트 
     디자인 가이드 
     Engineering Journal 
     신뢰성 보고서 
     소프트웨어/모델 
     EV 킷 

     가격 및 재고 유모 
     샘플 
     온라인 구매 
     패키지 정보 
     Lead-Free 정보 

     관련된 제품군 
     참고 사항 
     EV 킷 

    문서 레퍼런스 19-1312; 개정판 1; 2006-12-20
    이 페이지는 최근에 변경됨: 2007-06-01


            •         •         •     개인정보보호 정책     •     법적 고지

        Copyright © 2009 by Maxim Integrated Products