The MAX5354/MAX5355 combine a low-power, voltage-output, 10-bit digital-to-analog converter (DAC) and a precision output amplifier in an 8-pin µMAX® or DIP package. The MAX5354 operates from a single +5V supply, and the MAX5355 operates from a single +3.3V supply. Both devices draw less than 280µA of supply current.
The output amplifier's inverting input is available to the user, allowing specific gain configurations, remote sensing, and high output current capability. This makes the MAX5354/MAX5355 ideal for a wide range of applications, including industrial process control. Other features include a software shutdown and power-on reset.
The serial interface is compatible with SPI™/QSPI™ and MICROWIRE™. The DAC has a double-buffered input, organized as an input register followed by a DAC register. A 16-bit serial word loads data into the input register. The DAC register can be updated independently or simultaneously with the input register. All logic inputs are TTL/CMOS-logic compatible and buffered with Schmitt triggers to allow direct interfacing to optocouplers.
주요기능
애플리케이션/용도
10-Bit DAC with Configurable Output Amplifier
+5V Single-Supply Operation (MAX5354)
+3.3V Single-Supply Operation (MAX5355)
Low Supply Current:
0.28mA Normal Operation
2µA Shutdown Mode
Available in 8-Pin µMAX
Power-On Reset Clears DAC Output to Zero
SPI/QSPI and MICROWIRE Compatible
Schmitt-Trigger Digital Inputs for Direct Optocoupler Interface
다운로드
