The MAX1259 battery manager provides backup-battery
switching for CMOS RAM, microprocessors, or other
low-power logic ICs. It automatically switches to the
backup battery when the primary power supply is interrupted.
Low-loss switches guarantee an input-to-output
differential of only 200mV while supplying 250mA from
the primary power supply or 15mA from the battery.
Battery discharge during shipping does not occur in the
MAX1259, since the backup battery can be disconnected
by strobing the RST input.
A battery-fail output signal indicates when the backup
battery is below +2V, and a power-fail output signal indicates
when the primary power supply is low. The
MAX1259 monitors the backup battery, warns of
impending power failures, and switches the memory to
the battery when failures occur. The MAX1259 is pin-compatible
with the DS1259, but consumes three times
less supply current. Commercial, extended, and military
temperature range devices are available.
주요기능
애플리케이션/용도
Switches to Backup Battery if Power Fails
Consumes Less than 100nA of Battery Current
Power-Fail Output Signals Primary
Power-Supply Loss
Battery Monitor Indicates Low Battery
Battery Can Be Disconnected to Prevent
Discharge During Shipping
Battery Automatically Reconnected when
VCC is Applied
Pin-Compatible with the DS1259
Supply Current Three Times Lower than DS1259
Available in Extended-Industrial and Military
Temperature Ranges
Notes: **This pricing is BUDGETARY, for comparing similar parts. Prices are in
U.S. dollars and subject to change. Quantity pricing may vary
substantially and international prices may differ due to local
duties, taxes, fees, and exchange rates. For volume-specific prices
and delivery, please see the price and availability page
or contact an authorized distributor.
다운로드