MAX186, MAX188 저전력, 8채널, 직렬 12비트 ADC

QuickView

기술 자료

주문 정보

추가 정보

전체

제품 설명

전체 데이터 시트 (PDF, 256kB)
English

다운로드

The MAX186/MAX188 are 12-bit data-acquisition systems that combine an 8-channel multiplexer, high-bandwidth track/hold, and serial interface together with high conversion speed and ultra-low power consumption. The devices operate with a single +5V supply or dual ±5V supplies. The analog inputs are software configurable for unipolar/bipolar and single-ended/differential operation.

The 4-wire serial interface directly connects to SPI™, QSPI™ and MICROWIRE™ devices without external logic. A serial strobe output allows direct connection to TMS320 family digital signal processors. The MAX186/MAX188 use either the internal clock or an external serial-interface clock to perform successive-approximation A/D conversions. The serial interface can operate beyond 4MHz when the internal clock is used.

The MAX186 has an internal 4.096V reference while the MAX188 requires an external reference. Both parts have a reference-buffer amplifier that simplifies gain trim.

The MAX186/MAX188 provide a hard-wired active-low SHDN pin and two software-selectable power-down modes. Accessing the serial interface automatically powers up the devices, and the quick turn-on time allows the MAX186/MAX188 to be shut down between every conversion. Using this technique of powering down between conversions, supply current can be cut to under 10µA at reduced sampling rates.

The MAX186/MAX188 are available in 20-pin DIP and SO packages, and in a shrink small-outline package (SSOP), that occupies 30% less area than an 8-pin DIP. For applications that call for a parallel interface, see the MAX180/MAX181 data sheet. For anti-aliasing filters, consult the MAX274/MAX275 data sheet.

주요기능

애플리케이션/용도

8-Channel Single-Ended or 4-Channel Differential Inputs
Single +5V or ±5V Operation
Low Power:
- 1.5mA (operating mode)
- 2µA (power-down mode)
Internal Track/Hold, 133kHz Sampling Rate
Internal 4.096V Reference (MAX186)
SPI-, QSPI-, MICROWIRE-, TMS320-Compatible 4-Wire Serial Interface
Software-Configurable Unipolar or Bipolar Inputs
20-Pin DIP, SO, SSOP Packages
Evaluation Kit Available

	자동 시험 장비 (ATE)
	배터리 전원 애플리케이션
	데이터 수집
	고정밀 프로세스 제어
	의료 기구
	휴대용 데이터 로깅
	로봇 공학

Key Specifications: Precision ADCs (< 5Msps)

Part Number

ADC Resolution (Bits)

Input Channels

Conv. Rate (ksps)

Max. Conv. Time (µs)

Data Bus (Bits)

Ref. (V)

Input Range (V)

Diff. In

Supply Voltage (V)

Typ. Supply Current (mA)

Typ. Power (mW)

Low Power Mode

Standby Mode

EV-Kit

RoHS Available

Industry Qualified

Package

Smallest Available Package (max w/pins) (mm²)

Operating Temp. Range (°C)

Price^**

MAX186

133

Serial

Int +4.096

Yes

±5
5

1.5

7.5

Yes

MIL-STD-883B

Ceramic DIP/20
DICE SALES/0
LCC/20
PDIP/20
SOIC/20
SSOP/20

-40 to +85
-55 to +125
0 to +70

$8.95 @ 1k

MAX188

Ext

±2.5
5

Ceramic DIP/20
DICE SALES/0
PDIP/20
SOIC/20
SSOP/20

$8.45 @ 1k

See All Precision ADCs (< 5Msps) (301)

Notes:
^**This pricing is BUDGETARY, for comparing similar parts. Prices are in U.S. dollars and subject to change. Quantity pricing may vary substantially and international prices may differ due to local duties, taxes, fees, and exchange rates. For volume-specific prices and delivery, please see the price and availability page or contact an authorized distributor.