The MAX195 is a 16-bit successive-approximation analog-to-digital converter (ADC) that combines high speed, high accuracy, low power consumption, and a 10µA shutdown mode. Internal calibration circuitry corrects linearity and offset errors to maintain the full rated performance over the operating temperature range without external adjustments. The capacitive-DAC architecture provides an inherent 85ksps track/hold function.
The MAX195, with an external reference (up to +5V), offers a unipolar (0V to VREF) or bipolar (-VREF to VREF) pin-selectable input range. Separate analog and digital supplies
minimize digital-noise coupling.
The chip select (CS) input controls the three-state serial-data output. The output can be read either during conversion as the bits are determined, or following conversion at up to 5Mbps using the serial clock (SCLK). The end-of-conversion (EOC) output can be used to interrupt a processor, or can be connected directly to the convert input (CONV) for continuous, full-speed conversions.
The MAX195 is available in 16-pin DIP, wide SO, and ceramic sidebraze packages.
주요기능
애플리케이션/용도
16 Bits, No Missing Codes
90dB SINAD
9.4µs Conversion Time
10µA (max) Shutdown Mode
Built-In Track/Hold
AC and DC Specified
Unipolar (0V to VREF) and Bipolar (-VREF to VREF) Input Range
다운로드
