|
제품 설명
|
The MAX1601/MAX1604 DC power-switching ICs contain a network of low-resistance MOSFET switches that deliver selectable VCC and VP-P voltages to two CardBus or PC Card host sockets. Key features include ultra-low-resistance switches, small packaging, soft-switching action, and compliance with PCMCIA specifications for 3V/5V switching. 3.3V-only power switching for fast, 32-bit CardBus applications is supported in two ways: stiff, low-resistance 3.3V switches allow high 3.3V load currents (up to 1A); and completely independent internal charge pumps let the 3.3V switch operate normally, even if the +5V and +12V supplies are disconnected or turned off to conserve power. The internal charge pumps are regulating types that draw reduced input current when the VCC switches are static. Also, power consumption is automatically reduced to 10µA max when the switches are programmed to high-Z or GND states over the serial interface, unlike other solutions that may require a separate shutdown-control input.
Other key features include guaranteed specifications for output current limit level, and guaranteed specifications for output rise/fall times (in compliance with PCMCIA specifications). Reliability is enhanced by thermal-overload protection, accurate current limiting, an overcurrent-fault flag output, undervoltage lockout, and extra ESD protection at the VCC/VP-P outputs. The SMBus™ serial interface is flexible, and can tolerate logic input levels in excess of the positive supply rail.
The MAX1604 and MAX1601 are identical, except for the MAX1604's VY switch, which has roughly three-times the on-resistance (typically 140mΩ). The MAX1601/MAX1604 fit two complete CardBus/PCMCIA switches into a space-saving, narrow (0.2in. or 5mm wide) SSOP package.
|
| 주문 정보 |
|
참고:
- 부품을 구매하기 위한 기타 옵션 및 링크는 http://korea.maxim-ic.com/sales에 실려 있습니다.
- 필요한 것을 찾지 못하셨나요?
Maxim 애플리케이션 엔지니어에게 문의하십시오. 부품을 찾는데 필요한 전문가의 도움이 보통 업무일 1일 이내에 제공됩니다.
- 부품번호 suffix: T 또는 T&R = 테잎 앤 릴,
+ = RoHS/lead-free,
# = RoHS/lead 예외.추가 정보: 전체 데이터 시트 또는 부품번호 규칙
- *일부 패키지는 크기 편차(variation)를 가지며 이 값은 도면 상에 제시되어 있습니다. “패키지 코드/편차”는 해당 제품이 사용하고 있는 편차를 보여줍니다. 부품번호 suffix에 "+", "#", "-"는 RoHS 준수 상태를 나타냅니다. 패키지 도면에 suffix 문자는 다를 수 있습니다.
|
소자:
1-8
/
8
|
| MAX1601 |
무료 샘플 |
구매 |
|
패키지:
|
타입 핀 풋프린트
|
| |
도면 코드/편차 *
|
|
온도 |
RoHS/Lead-Free? 재료 분석 |
MAX1601EAI+
|
|
|
SSOP,28 핀,82 mm²
도면: 21-0056 (PDF)
Land Pattern: 90-0095 (PDF)
패키지 코드/편차 이용: A28+1*
|
-40°C ~ +85°C
|
RoHS/Lead-Free: Lead-Free
재료 분석
|
MAX1601EAI+T
|
|
|
SSOP,28 핀,82 mm²
도면: 21-0056 (PDF)
Land Pattern: 90-0095 (PDF)
패키지 코드/편차 이용: A28+1*
|
-40°C ~ +85°C
|
RoHS/Lead-Free: Lead-Free
재료 분석
|
MAX1601EAI
|
|
|
SSOP,28 핀,82 mm²
도면: 21-0056 (PDF)
Land Pattern: 90-0095 (PDF)
패키지 코드/편차 이용: A28-1*
|
-40°C ~ +85°C
|
RoHS/Lead-Free: 아니오
재료 분석
|
MAX1601EAI-T
|
|
|
SSOP,28 핀,82 mm²
도면: 21-0056 (PDF)
Land Pattern: 90-0095 (PDF)
패키지 코드/편차 이용: A28-1*
|
-40°C ~ +85°C
|
RoHS/Lead-Free: 아니오
재료 분석
|
| MAX1604 |
무료 샘플 |
구매 |
|
패키지:
|
타입 핀 풋프린트
|
| |
도면 코드/편차 *
|
|
온도 |
RoHS/Lead-Free? 재료 분석 |
MAX1604EAI
|
|
|
SSOP,28 핀,82 mm²
도면: 21-0056 (PDF)
Land Pattern: 90-0095 (PDF)
패키지 코드/편차 이용: A28-1*
|
-40°C ~ +85°C
|
RoHS/Lead-Free: 아니오
재료 분석
|
MAX1604EAI-T
|
|
|
SSOP,28 핀,82 mm²
도면: 21-0056 (PDF)
Land Pattern: 90-0095 (PDF)
패키지 코드/편차 이용: A28-1*
|
-40°C ~ +85°C
|
RoHS/Lead-Free: 아니오
재료 분석
|
MAX1604EAI+
|
|
|
SSOP,28 핀,82 mm²
도면: 21-0056 (PDF)
Land Pattern: 90-0095 (PDF)
패키지 코드/편차 이용: A28+1*
|
-40°C ~ +85°C
|
RoHS/Lead-Free: Lead-Free
재료 분석
|
MAX1604EAI+T
|
|
|
SSOP,28 핀,82 mm²
도면: 21-0056 (PDF)
Land Pattern: 90-0095 (PDF)
패키지 코드/편차 이용: A28+1*
|
-40°C ~ +85°C
|
RoHS/Lead-Free: Lead-Free
재료 분석
|