The MAX1480A/MAX1480B/MAX1480C/MAX1490A/
MAX1490B are complete, electrically isolated, RS-485/
RS-422 data-communications interface solutions in a
hybrid microcircuit. Transceivers, optocouplers, and a
transformer provide a complete interface in a standard
DIP package. A single +5V supply on the logic side powers
both sides of the interface.
The MAX1480B/MAX1480C/MAX1490B feature reducedslew-
rate drivers that minimize EMI and reduce reflections
caused by improperly terminated cables, allowing
error-free data transmission at data rates up to 250kbps.
The MAX1480A/MAX1490A driver slew rate is not limited,
allowing transmission rates up to 2.5Mbps. The
MAX1480A/B/C are designed for half-duplex communication,
while the MAX1490A/B feature full-duplex communication.
Drivers are short-circuit current limited and protected
against excessive power dissipation by thermal shutdown
circuitry that places the driver outputs into a highimpedance
state. The receiver input has a fail-safe
feature that guarantees a known output (RO-bar low for the
MAX1480A/B/C, RO high for the MAX1490A/B/C) if the
input is open circuit.
The MAX1480A/MAX1480B/MAX1480C/MAX1490A/
MAX1490B typically withstand 1600VRMS (1 minute) or
2000VRMS (1 second). Their isolated outputs meet all
RS-485/RS-422 specifications. The MAX1480A/B/C are
available in a 28-pin DIP package, and the MAX1490A/B
are available in a 24-pin DIP package.
주요기능
애플리케이션/용도
For Integrated ESD Protection
MAX1480E/MAX1490E: ±15kV ESD-Protected,
Isolated RS-485/RS-422 Data Interfaces
For Space-Constrained Applications
MAX3157: High CMRR, RS-485 Transceiver with
±50V Isolation
다운로드
