ENGLISH 简体中文 日本語 한국어  

MAX3140
진정한 페일 세이프 RS-485/RS-422 트랜시버가 내장된 SPI/MICROWIRE 호환 UART


  QuickView     기술 자료     주문 정보     추가 정보     전체  
제품 설명
전체 데이터 시트 (PDF, 480kB)
English Download this datasheet in PDF format다운로드

The MAX3140 is a complete universal asynchronous receiver-transmitter (UART) and a true fail-safe RS-485/RS-422 transceiver combined in a single 28-pin QSOP package for space-, cost-, and power-constrained applications. The MAX3140 saves additional board space as well as microcontroller (µC) I/O pins by featuring an SPI™/QSPI™/MICROWIRE™-compatible serial interface. It is pin-programmable for configuration in all RS-485/RS-422 networks.

The MAX3140 includes a single RS-485/RS-422 driver and receiver featuring true fail-safe circuitry, which guarantees a logic-high receiver output when the receiver inputs are open or shorted. This feature provides immunity to faults without requiring complex termination. The MAX3140 provides software-selectable control of half- or full-duplex operation, data rate, slew rate, and transmitter and receiver phase. The RS-485 driver slew rate is programmable to minimize EMI and results in maximum data rates of 115kbps, 500kbps, and 10Mbps. Independent transmitter/receiver phase control enables software correction of twisted-pair polarity reversal. A 1/8-unit-load receiver input impedance allows up to 256 transceivers on the bus.

The MAX3140's UART includes an oscillator circuit derived from an external crystal, and a baud-rate generator with software-programmable divider ratios for all common baud rates from 300 baud to 230k baud. The UART features an 8-word-deep receive FIFO that minimizes processor overhead and provides a flexible interrupt with four maskable sources, including address recognition on 9-bit networks. Two control lines are included for hardware handshaking-one input and one output.

The MAX3140 operates from a single +5V supply and typically consumes only 645µA with the receiver active. Hardware-invoked shutdown reduces supply current to only 20µA. The UART and RS-485/RS-422 functions can be used together or independently since the two functions share only supply and ground connections (the MAX3140 is hardware- and software-compatible with the MAX3100 and MAX3089).

주요기능   애플리케이션/용도
  • Integrated UART and RS-485/RS-422 Transceiver in a Single 28-Pin QSOP
  • SPI/MICROWIRE-Compatible Interface Saves µC I/O Pins
  • True Fail-Safe Receiver Output Eliminates Complex Network Termination
  • Pin-Programmable RS-485/RS-422 Features
    • Half/Full-Duplex Operation
    • Slew-Rate Limiting for Reduced EMI
    • 115kbps/500kbps/10Mbps Data Rates
    • Receiver/Transmitter Phase for Twisted-Pair Polarity Reversal
  • Full-Featured UART
    • Programmable Up to 230k baud with a 3.6864MHz Crystal
    • 8-Word Receive FIFO Minimizes Processor Overhead
    • 9-Bit Address-Recognition Interrupt
  • Allows Up to 256 Transceivers on the Bus
  • Low 20µA Hardware Shutdown Mode
  • Hardware/Software-Compatible with MAX3100 and MAX3089

 
  • 임베디드 시스템
  • HVAC 및 빌딩 제어
  • 산업용 제어 LAN
  • 인텔리전트 장비
  • POS 기기
  • EMI에 민감한 애플리케이션용 트랜시버

    Key Specifications:   SPI/Microwire-Compatible UARTs
    Part Number µP Interface Typ. Supply Current (mA) Supply Voltage (V) Operating Temp. Range (°C)
    MAX3140  SPI and Microwire Compatible 0.7 5 -40 to +85
    0 to +70
    See All SPI/Microwire-Compatible UARTs (4)

    다이어그램
    MAX3140: Typical Application Circuit
    일반 애플리케이션 회로

    필요한 것을 찾지 못하셨나요?
  • 익일에 제공되는 애플리케이션 엔지니어의 제품 선택 조언
  • 파라메트릭 검색
  • 애플리케이션 도움말
  •  QuickView   기술 자료   주문 정보   추가 정보  
     제품 설명 
     주요기능 
     애플리케이션/용도 
     주요 사양 
     다이어그램 

     데이터 시트 
     애플리케이션 노트 
     디자인 가이드 
     Engineering Journal 
     신뢰성 보고서 
     소프트웨어/모델 
     EV 킷 

     가격 및 재고 유모 
     샘플 
     온라인 구매 
     패키지 정보 
     Lead-Free 정보 

     관련된 제품군 
     노트 및 코맨트 
     EV 킷 

    문서 레퍼런스 19-1453; 개정판 0; 1999-06-01
    이 페이지는 최근에 변경됨: 2008-03-07




             


          개인정보보호 정책    법적 고지

          Copyright © 2008 by Maxim Integrated Products, Dallas Semiconductor


    ">