Tech Brief 32: Frequency Doubler using Delay Lines
Abstract: Any independent delay line, in conjunction with a XOR gate, can be made into a clock frequency doubler by delaying the clock signal, and combining the delayed clock signal with the undelayed signal using the external logic. This application brief demonstrates how it can be done with a DS1035. The technique works with the DS1100 and DS1135 series as well.
If a clock signal is delayed by one-quarter period, it can be gated with the original waveform to produce a
novel application: frequency-doubled output.
This time, the XOR propagation delay (tPD) will impact only the relative skew from input to output and will
not otherwise distort the waveform. Obviously, the optimum delay time for this application is one-quarter of
the input period. Deviation from this "ideal" value, or altering the input frequency, will cause a change in the
output duty cycle but will not change the frequency. The minimum usable delay (lowest usable input
frequency) is dependent only on the minimum acceptable output pulse width or duty cycle. The maximum
usable delay (highest input frequency) is constrained by the minimum input pulse width specification of the
delay line.
의견을 보내주세요! 위 내용이 도움이 되셨나요? 여러분의 의견을 기다립니다 — Maxim은 보내주신 정정이나 제안사항을 반영하고 있습니다.
이 페이지를 평가하고 의견을 보내주십시오.
다운로드, PDF 형식
