Abstract: This design idea describes a simple circuit to generate a programmable negative control voltage. It takes the output of a single supply digital-to-analog converter (DAC) and produces a variable negative voltage. The DAC output from 0V to +2.5V is converted to 0V to -5V at the output. Early digital-to-analog converters (DACs) were designed with standard R-2R ladders, and produced a negative output voltage. These early DACs (such as the MX7837/MX7847 and MAX523) require both a positive and a negative supply rail to accommodate their negative output. With the transition to single-supply integrated circuits, however, many modern DACs now operate with a single supply rail and an inverted R-2R ladder. The inverted R-2R ladder produces a positive output voltage. Despite the popularity of single-supply ICs, some applications still require a negative control voltage. One solution for this purpose is a modern, inverted R-2R ladder DAC and op amp (Figure 1). When compared with older DACs containing standard R-2R ladders, this approach offers lower supply voltages, higher speed, and smaller packages. Figure 1. This compact circuit enables microcontroller IC2 to generate a variable negative voltage. The DAC (IC3), operating with a 2.5V applied reference voltage from IC1 and driven by microcontroller IC2, produces an output swing from 0V to 2.5V. Op amp IC4 inverts and amplifies this output to produce a 0V to -5V output. For test purposes, a software routine enables the microcontroller to generate a 0V to -5V triangle-wave output. Please note that the output impedance of the DAC (IC3) is 6.25kΩ ±20%. To eliminate system gain errors that are caused by the DAC's output impedance, buffer the DAC output before the IC4 inverting stage. A similar version of this article appeared in the December 6, 2001 issue of EDN magazine. 의견을 보내주세요! 위 내용이 도움이 되셨나요? 여러분의 의견을 기다립니다 — Maxim은 보내주신 정정이나 제안사항을 반영하고 있습니다. 이 페이지를 평가하고 의견을 보내주십시오. 자동 업데이트 관심있는 분야의 애플리케이션 노트가 나올 때 자동으로 업데이트 받고 싶으세요? 그렇다면 EE-Mail™을 신청하십시오. 추가 정보   APP 1074: May 24, 2002 MAX4162 SOT23, 마이크로파워, 단일 전원, Rail-to-Rail I/O Op 앰프 전체 데이터 시트 (PDF, 400kB) 무료 샘플 MAX541 +5V, 직렬 입력, 전압-출력 16비트 DAC 전체 데이터 시트 (PDF, 248kB) 무료 샘플 MAX542 +5V, 직렬 입력, 전압-출력 16비트 DAC 전체 데이터 시트 (PDF, 248kB) 무료 샘플 MAX837 4핀 마이크로파워 전압 모니터 전체 데이터 시트 (PDF, 136kB) 무료 샘플   다운로드, PDF 형식 (29kB)  AN1074, AN 1074, APP1074, Appnote1074, Appnote 1074